Monstar Christmas Stockings!!

This came from a great shop on Etsy and of course when I saw it I knew I had to make one for our family (I would have totally bought them but she didn't have enough variety for my family- I think hers are MUCH cuter!!!)!!! I needed to make our newest addition's stocking anyway so why not make a whole new set?!?!

Here is what I did....

Materials needed:
• lots and lots of felt (large pieces for the main stocking part and scraps for details)
• sewing supplies
• glue (for those tiny pieces you just can't sew or for all of the details if you want)

My crew of monstar stockings!

Me as a monstar (all crazy like :)

Pocket for stuffing yummy treats!!

My husband as a monstar (he's a bit of a grinch :)

Pocket detail

AJ (our 8 month old daughter) as a monstar (note the teeth- though now she has 4! :)

Pocket detail

Ethan our first child (he was still born but remains a part of our lives) as a monstar

Pocket detail

To make these I simply cut out 3 large rectangles with rounded corners (again, I am not a measurer so I just said this looks good and cut out my pieces). On one of the rectangles I cut off the top and made it the mouth and pocket for stuffing.

To create the loop to hang it from I cut out 2 small, long rectangles and stitched them together (to make it thick and stronger) and then folded it and touched the 2 raw edges together and pinned it in between the front and back panels at the top

Then the fun part...decorate...create your monster add all the details and when you like your monstar the way you like it figure out what needs to be sewn first and start sewing!!! *note to make it sturdier I cut out 2 of each body part that would hang off the main rectangle base and stitched them together but only glued or stitched details to the front.

For me, I stitched down the details on arms, hair, feet, ect... or glued them down if they were too small (and waited for the glue to dry before stitching anything to them). Then I took the mouth pocket part and I folded over the edge and pinned it and then added my tongue or teeth where I wanted them and pinned them then stitched straight across it (stitching showing). Then I added the tummy detail sewing it to the pocket part only. Then for the wings I stitched a line down the back piece. Next I stitched down the eyes/ and face detail. Then I took any body part that would hang out of the felt (arms, legs, tentacles, horns, hair) and placed them between the front and back panels and then placed the pocket part onto the front and stitched around the perimeter of the main rectangles. I added shoes and stitched around the outside of it.

It took me a while to figure out the best order to sew it all in (esp because I wanted to us matching thread for the body parts so it took A LOT of switching thread and I tried to minimize when possible!) but once I did I was so glad I did it. I would have had to leave out a lot of things had I not planned it a bit.

Now they are hung and stuffed and ready for Christmas morning (which will be tomorrow for us since we are going to be traveling for the holidays but still wanted to have AJs first "Christmas" be in our new house!)

Traveling Felt Fairy Scene

It's been a while since I have posted here but I have moved and now have an 8 month old little girl, so needless to say I have been a bit busy, but I have been meaning to make a bunch of posts (just because I stopped blogging didn't mean I stopped creating). So I will be trying to post a few new projects this week!!

The latest project I have been working on was from a blog that I read. (It's a great blog! You should check it out!) Anyway, I decided I would make this for my niece for Christmas since it was just so cute and so easy!! I made a few changes to mine (as you can tell) but her way would have been way easier and is super cute! But I just had too much fun and found myself unable to stop (and still think I could add more scenes each birthday or Christmas or she could add her own!)

Materials needed:
• lots of felt and in several colors!!!
• 2 larger rectangles of felt for the outside and inside panels (I didn't measure mine I just cut it out)
• scrap of chalkboard fabric (optional- but totally awesome!!!!)
• puffy paint
• button
• scrap of elastic
• glue (white glue that dries clear works well here)
• sewing supplies
• small googly eyes (optional)

• hot glue gun (optional- I used it to glue the flower together on the front)
• scraps of cotton fabric (I made the handles and the a's on the front out of this material)
• double sided fusing (optional -used for applying cotton fabric letters to felt)

Everything closed up and ready to travel

Finished board

Pocket on finished board 

Empty board with play pieces

Play pieces

Sample of finished scene

Finished scene with title on chalkboard fabric

Close up detail of chalkboard fabric

To start this project I cut out a large rectangle out of 2 big pieces of felt. I didn't measure- not my style :) One of the rectangles is for the outside and will be the front and back when closed. One rectangle is for the main inside panel. 

Next I made a pocket panel. I was going to just have a solid green piece for the grass but low and behold I did not have enough of one green so I had to get a solid piece of felt and placed triangles of "grass" around it and quilted it. I loved how it turned out! I also added a long rectangle of chalkboard fabric (mainly because I had some extra and I am in LOVE with it!!!) so she could write whatever she wanted there.

The next step was to make my sky more funky too. I cut out some "wind" shapes and quilted it as well. 

Next I worked on the detail for the front. Here I just cut out her name (nothing special just free handed it) and then took a piece of cotton fabric and ironed on the double sided fusing to it). I drew an a on a piece of paper cut it out flipped it and traced it on the paper side of the fusing then cut out both a's and ironed them on to the front (after dry fitting it and figuring out how I wanted it to lay it out). Then I took the other felt letters of her name pinned them down and just sewed a line down the middle (also sewing the cotton letters too).

For the handles I used the same cotton fabric and cut out 2 long rectangles the same size and then sewed them right sides together and flipped them, ironed them, and pinned them in between the inside and outside panels. I also took my little bit of elastic and placed it in the center between the inside and outside panels on one side.

Then I pinned it all together. The inside and outside panels as well as the pocket. Then I sewed it up on all 4 sides with a zigzag stitch and then trimmed the edges...you could use a Serger but sadly I don't have one :(

For the flower on the front I cut out petal shapes for the petals one larger size and one smaller sized. I then glued the center bottom part and pinched it together (being careful of hot glue!!!) and glued them all together large ones first and then smaller ones on top. For the leaves I cut out 2 leaf shapes and added a dot of hot glue to the center bottom and pinched. For the center part of the flower I cut out a circle using my pinking shears and then sliced little lines toward the center (but keeping the center solid). Then I folded it onto itself added dabs of hot glue and attached it to the center of the flower. Then I hot glued it on. 

To finish off the carrier/background I added the button to the front panel where her name was (opposite the side with the elastic) using the elastic as my guide for placement. 

To do the play pieces I just came up with things I wanted to do, such as fairies, castle, rainbow, bugs, animals, nature things...then I cut out basic shapes to create them (all of it was free hand but I am sure you could look up silhouette pictures if you wanted to trace them). I glued the pieces together and let them dry. For detail I added puffy pen lines and dots and such (even used glitter puffy paint for the wings of the fairies). Then for the eyes I used small googly eyes (because I always love a reason to use googly eyes :)

Once all of your pieces are done and dry place them in the pocket, add a pack of chalk (maybe a chalk eraser) and it is the perfect present for a little girl.

When my little lady gets older I think I want to make her a monstar making one...complete with eyes, mouths, warts, whatever :)

Felt Robot Monstar

Materials Needed:
• felt (assorted colors)
• embroidery needle
• embroidery thread
• googly eyes
• fiber fill
• hot glue & hot glue gun



To make this little robot monstar I started off with a sheet of light blue felt and a darker blue felt (for the back of this monstar). I drew the shape of the monstar that I wanted and then cut out both the light blue and dark blue felt giving me 2 of the same shape pieces. Next I placed the mouth and heart on and sewed them to the front of the light blue felt.

Then I grab both the light blue felt cutout and the darker blue felt cut out and I put them wrong sides together (right sides facing out). Then I got white embroidery thread and my embroidery needle and did a blanket stitch all around the robot, stuffing it with fiber fill as I went (you may need a chopstick to push fiber fill into smaller areas). When I finished sewing all the way around I got 2 different sized googly eyes and hot glued them on. Voila a cute little robot monstar!

Recycled Jar Lid Collage

Materials needed:
• jar lid (mine had about a 3 in. diameter)
• Mod Podge
• paint brush
• scrap paper
• scrap ribbon
• scrap felt
• photo (I printed mine out after resizing it to fit into the 3 in. jar lid)
• cardboard scraps
• glue on jewels
• hot glue




This idea sort of came to me after finding this lids that I had saved to one day do a craft project with (that was like 3 years ago) and so I decided it was time to use them. At first I just Mod Podged the pictures in and painted the Mod Podge on top and added some of the jewels. It looked alright but I wanted to add an element of fun to it, so I went back to the drawing board and came up with the idea of a 3-D collage lid.

First, I got a picture of my husband and I at our wedding and printed it out (sized to fit my 3 in. diameter). Then I traced the lid onto a sheet of scrap paper and cut a circle out (cutting inside the edge a bit so that it would fit). I did this to the polka dot paper and the pink tree paper-both being cut into circles. Then I put the polka dot one for the background in the lid and used Mod Podge all over. Then I took my pink paper and drew a tree shape on the back side and cut it out. Then I used the Mod Podge and placed the tree inside the lid.

Next I took the photo and cut out the background and cut the bottom into a circular shape to fit the lid. I glued the photo to a scrap piece of cardboard and then hot glued it into the lid. Then I cut out a heart out of some orange scrap paper and painted some glitter on it then glued some thinner cardboard to it and glued it behind out heads. Then I got some glue on jewels and made little blossoms for the tree.

Then I got some scrap ribbons and took a white one with wire and scrunched it around the back hot gluing as I went. Next I took a thin ribbon and glues it on the edges of the lid. To finish the back I cut out a felt circle and hot glued it to the back of the lid.

I am not sure yet what this will be but it can be a magnet by gluing a magnet on or I may hang a piece of ribbon from it and make it a hanging picture or an ornament for our tree this year. Not sure yet but there are a few possibilities for sure.

Sock Monkey or Sock Monstar

Materials needed:
• pair of socks (or more)
• sewing machine & thread (or hand sew)
• buttons, googly eyes, felt, embroidery thread (for details)
• fiberfill
• chop stick (or long thin object to stuff arms and legs with)







So who doesn't wonder what to make with a pair of socks? The top 2 pictures is of my version of a sock monkey I made for my husband- this was the very first thing I made of socks! The bottom photo is one of my sock monstars (this is my little sis'). I got the idea for sock monstars from a book my big sis got me called Stupid Sock Creatures: Making Quirky, Lovable Figures from Cast-off Socks (great book for the know how and creativity inspiration).

Sock Monkey How To:
To start the sock monkey I chose my socks (I got a pair of long socks because I wanted this monkey to be able to hug my husband tight) then I laid it out with the heel side down and flattened it out the best I could. Then I cut a line in the center of the leg part of the sock from the part where you put your foot in to until about an 1.5 inches from the heel of the legs to create the legs. Once they were cut I went to the sewing machine and flipped it inside out then stitched the bottom of his legs and then up the inside of his legs leaving the crotch area to flip and stuff the monkey with.

Once his legs were sewn, I flipped the monkey inside out and I got some fiber fill and filled in the monkey (legs first- using a chopstick to stuff it into the bottom). Then stitched his crotch up using a slip stitch.

Next I got the other sock and cut off the heel (for his mouth) and 2 arms (the same way you did his feet) and then cut out 2 sets of ear shapes (4 total because your sock will have 2 layers you cut at once).

For the arms I sewed them inside out leaving one side open to stuff and sew to the monkey. For the ears (there are 2 so you will do this twice) I sewed them inside out all the way around leaving one side open so I could stuff it a bit and sew it onto the monkey head.

Once I had my arms ready I turned them right sides out and stuffed it using a chop stick and folded it under on the sides then did a quick hand stitch just to help it stay then placed it on the monkey and did a slip stitch around the arm twice securing it to the body. I did it again for the other arm.

Next I added the mouth (the heel part of the second sock). Here I folded over a small edge all the way around and flattened it then placed it where I wanted and did a slip stitch around it stopping with enough room to stuff his mouth then I finished sewing it up. Then I went to the ears and stuff them a little bit and again folded a small part all the way around and slip stitched it onto the monkey head. Then I got my embroidery thread and made a quick mouth crease by coming from one side to the other and then tying it off. Lastly I added black buttons for eyes (you can of course use anything you want- googly eyes, felt...ect).

Sock Monstar How To:
To create the sock monstar you use the same principles as the monkey but with a lot more creativity! Here instead of using the toe part of the sock for a head I cut it into a diagonal giving it more attitude (in my opinion at least). Also instead of leaving the heel of the first sock on the back I used it on the front and made it into a sewn down mouth (this came from the book: Stupid Sock Creatures: Making Quirky, Lovable Figures from Cast-off Socks) and I added a pink felt tounge sticking out. Then I did the arms the same as the sock monkey arms I just used different socks to make them. For the eyes I used googly eyes but I sewed them to a patch of hot pink felt that was eye liner and lashes for this girly monstar. Lastly I added some white felt wings so this monstar could fly. What is just so great about this is that you can pretty much do anything. I have added tails big heads, teeth, clothing, all kinds of stuff. It is just so much fun and not too difficult either.

Recycled Scrap T-Shirt Monstars

Materials needed:
• scrap material
• snap on eyes (available at craft stores)
• sewing machine (optional- can be hand sewn) & thread
• felt (optional for details- you could also use fabric paint or embroider details)
• yarn (optional for hair or other details)
• ribbon (optional for details)






Another super simple and fun project to do with some scrap pieces of fabric!

I made the top one out of scraps from my little sister's t-shirt purse I made her (the t-shirts were one's that she no longer fit in). The bottom one was just some scrap material I had lying around.

The idea is simple. I quickly drew a random shape and cut out 2 from either the same fabric (like in my second one) or different fabrics (like in the first one) and sewed all around the edges leaving a small space to flip it inside out. Once it was sewed clip around the curves (I normally clip the edges a lot when working with t-shirt material because it won't unravel). Then I flipped it inside out.

Next I added face details. With these 2 monstars I made felt mouths (including teeth on the bottom monstar) and then I got these plastic snap on eyes that you can get then at fabric and craft stores (what I love about these is they are super simple but instantly give it some personality). To attach the eyes you simply cut a small slice where you want them to go and then place the top of the eye through the hole and then using your opening on the bottom put your bottom eye attachment on to snap tight and keep the eye in place. You can also use buttons or felt or whatever you have lying around that would work for your monstar (that is one thing I love about making monstars is that no one knows what they are supposed to look like so you can make them look like whatever!)

After the face is done you can add little details like a belly, hair (on my bottom monstar), bow (on my top monstar) or whatever (again open to your interpretation). To make the hair I used some scrap yarn I had and cut it into longish stripes then sewed it down, when that was done I gave him a hair cut and styled it short and punky! For the belly I just sewed on a felt oval shape, The bow was a scrap piece of ribbon that I tied and then hand stitched on.

Once all the details are done I stuffed it using fiber fill (you can also use scrap material or whatever is soft and fluffy and you have lying around. Fill your monstar up and then sew it shut using a slip stitch. Now you can cuddle with your cute little homemade monstar!

Recycled T-Shirt Baby Quilt

Materials needed:
• 6-12 old t-shirts (or scrap material)
• sewing machine & thread
• embroidery thread
• batting (or old sheet or fabric)
• scrap fabric for borders
• yard or so of fabric for back
• patches (optional)
• felt (optional)
• yarn (optional)




close up view

I am one of those people who feels emotionally attached to my clothing, so I always had a hard time cleaning out my closet when the time came. Even though things wouldn't fit I just couldn't help but wanting to keep them because inevitably they reminded me of some time in my life. So instead of letting them just sit in my closet and never see the light of day I decided to make my husband and I a quilt out of them. The original one is a huge and it took me 2 years to finish (note: I worked on it on and off for the 2 years mainly waiting to collect enough old clothes in the process but I think if I was diligent on it and had all the scraps I needed it would have taken me about 4 months).

This one above took me about 3 days. It is a small version that I made for my little Zoe, while I was pregnant. I really loved the idea that she would sleep with our shirts and smell and be "protected" by us. I have made this baby blanket sized quilt a few other times and don't find it to be too hard to do with a little time and patience.

To start I gathered scraps of t-shirts from our other quilt but chances are you don't have that so you can either use scrap material you have or just gather 6-12 t-shirts that you no longer wear any more but have some attachment to. Then I got a piece of scrap foam board (anything thing and sturdy will do I used it as my template) I measured out how big I wanted the squares. In this one above there are 2 different sizes a smaller square and a larger one. I made the smaller ones 1/2 the size of the larger one and added a 1/4 in seam allowance (meaning the bigger one was 8.5 in sq and the smaller one then would be 4.25 in sq plus the 1/4 in for the seam allowance giving me 4.5 in sq). . Another great idea I have seen is that you just cut long strips and sew them together which gives it a fun stripy look. You of course can do just about anything you want- shapes, colors, whatever you can think of.

So after making my templates I grabbed my shirts and placed the template right on top and then used my rotary cutter and cut around the template (you can also mark it with sewing pencils or chalk and then cut on your line). Once I had enough to lay it down (the total size of my quilt with out the border was 27.5 in x 36.5) I laid out the pieces the way they looked best to me. I just did a simple pattern here of a big square, 4 small squares, big square, 4 sm. sq. across and then switched it for the next row and made it 4 sm sq, big sq, 4 sm sq, big square and again for the next row I switched it back. Ending with 4 rows across and 4 rows down (and a row I count as the size of my big square).

Once they are in position the way I like them I take one section of the 4 sm sq and sew those together to make a piece that is as big as my bg sq. I do this for all my sm sq until they are all in big pieces. Then I pin my first row together and sew it. Then I take my second row and sew it and then the third row and sew it. Then I pin the first row to the second row and sew and then that piece gets pinned to the 3rd row and I sew it.

Once that whole center piece is done I then find a scrap fabric to make a border on my edges (normally this means it will be a mix of colors but you can of course finish it off with the same color and fabric or whatever is easiest for you). For the border on this one I used 2 inches thick of material and sewed it to my shorter sides all the way up. Then I trimmed off the excess material (I didn't do any measuring lengthwise because when I do I inevitably end up with miss matched pieces in the bad way- this is how I avoid any problems). I did the same to the other short side (I did this so my sides would look the same but you can just work your way around if you want- going from short side to long side to short side to long side or if you know how you can even make diagonal cornors). Once the 2 short sides were done I did the long sides.

When your border is finished I then added a little batting. I used the batting (from the fabric store) I had left over from my other quilt but if you want you can also use old sheets or old curtians- whatever. Then I laid the quilt onto the batting with the quilt facing up. I smoothed it out and pined it using quilt safety pins. The reason I use those is because they don't rust out in time and this project can take a while (like my 2 year quilt). Then I trimmed it down to about the edge of my borders just to make it easier to work with.

Next I got embroidery thread (leaving it as 6 strands but you can make it as thick as you want) and did a simple stitch around where I sewed my t-shirts together, sewing the t-shirts to the batting. I loved doing this chunky hand stitch because it really looks hand done and has a quirkiness about it.

Once I sewed all of my squares to the backing I then trimmed down the batting about 1/2 in from the edge of the border all the way around (I leave it on at first just in case I pull on the batting and end up too short on one side). Then I added my monstar and dragonfly. To do the monstar I just cut the shapes out of felt and fleece remnants I had and then hand stitched it to my quilt before finishing it off I got a little bit of fiber fill and stuffed it making it 3-D but plush still. Then I got some patches (a dragonfly and flower) and hand sewed them on.

When the decorating is done I got a large section of scrap fabric (it measured over the final size of my quilt) from my other quilt or you can buy about a yard of a soft fabric (measure your final piece and make sure to get enough fabric for your piece) or just sew a couple of larger scraps together. Then I pinned it with right sides together and started sewing starting the edges together leaving an opening for me to flip it inside out.

Once sewed I trimmed the corners so they would lie flat and then flipped it inside out. Then I pinned the border down and sewed (stitch showing) around my border close to the t-shirt part. This helps it attach to the back piece of fabric better. Then I hand stitched my opening closed using a simple slip stitch and it was finished. If you are making a larger quilt I recommend getting some scrap yarn and sewing little knots on the corners of your squares to tie them to the fabric below. On the small quilt this doesn't matter as much but the larger the quilt the more stability you need to keep the 2 pieces from sliding around.

Monstar Finger Puppets

Materials needed:
• felt
• fabric paint
• sewing machine
• thread

So I was watching Martha on the DIY network and she made these little bug finger puppets and of course I had to make it a monstar!

So what I did was traced my big finger onto felt and then sewed it larger than that (because it loses some space due to extra fabric inside) and then I painted it's face on using fabric paint. One day I will add more to them like arms possibly but I even love the simple ones. Here are the photographs (the photos are blurry, I took it with my phone). It is a really simple project and I feel like anyone can do it!

Monstar Onesies

Materials Needed:
• blank onesie
• embroidery thread (colors of your choice)
• felt (fleece can also be used but felt is better)
• embroidery needle
• embroidery hoop

So I decided to create a blog of the many crafts I find myself getting sucked into. To start I will introduce you to some of my Monstar Onesies. These were started when I was pregnant and decided to make some embroidered onesies for my little Ethan.

To start I bought a 5 pack of onesies from the store and several colors of felt and white embroidery thread. I cut the monstars out and placed them on the shirt until I found something I liked the look of (later on I would sketch out monstars and then create them- though they always look a bit different once they are finished). Then tried to sew as much together as possible before sewing it onto the fabric (to minimize thread knots) and then sewed it on the onesie using an embroidery hoop to keep my fabric taught. Then with some of the details I used embroidery thread and different embroidery stitches to create different looks. Here are a few samples of ones I have made.