Monstar Christmas Stockings!!

This came from a great shop on Etsy and of course when I saw it I knew I had to make one for our family (I would have totally bought them but she didn't have enough variety for my family- I think hers are MUCH cuter!!!)!!! I needed to make our newest addition's stocking anyway so why not make a whole new set?!?!

Here is what I did....

Materials needed:
• lots and lots of felt (large pieces for the main stocking part and scraps for details)
• sewing supplies
• glue (for those tiny pieces you just can't sew or for all of the details if you want)

My crew of monstar stockings!

Me as a monstar (all crazy like :)

Pocket for stuffing yummy treats!!

My husband as a monstar (he's a bit of a grinch :)

Pocket detail

AJ (our 8 month old daughter) as a monstar (note the teeth- though now she has 4! :)

Pocket detail

Ethan our first child (he was still born but remains a part of our lives) as a monstar

Pocket detail

To make these I simply cut out 3 large rectangles with rounded corners (again, I am not a measurer so I just said this looks good and cut out my pieces). On one of the rectangles I cut off the top and made it the mouth and pocket for stuffing.

To create the loop to hang it from I cut out 2 small, long rectangles and stitched them together (to make it thick and stronger) and then folded it and touched the 2 raw edges together and pinned it in between the front and back panels at the top

Then the fun part...decorate...create your monster add all the details and when you like your monstar the way you like it figure out what needs to be sewn first and start sewing!!! *note to make it sturdier I cut out 2 of each body part that would hang off the main rectangle base and stitched them together but only glued or stitched details to the front.

For me, I stitched down the details on arms, hair, feet, ect... or glued them down if they were too small (and waited for the glue to dry before stitching anything to them). Then I took the mouth pocket part and I folded over the edge and pinned it and then added my tongue or teeth where I wanted them and pinned them then stitched straight across it (stitching showing). Then I added the tummy detail sewing it to the pocket part only. Then for the wings I stitched a line down the back piece. Next I stitched down the eyes/ and face detail. Then I took any body part that would hang out of the felt (arms, legs, tentacles, horns, hair) and placed them between the front and back panels and then placed the pocket part onto the front and stitched around the perimeter of the main rectangles. I added shoes and stitched around the outside of it.

It took me a while to figure out the best order to sew it all in (esp because I wanted to us matching thread for the body parts so it took A LOT of switching thread and I tried to minimize when possible!) but once I did I was so glad I did it. I would have had to leave out a lot of things had I not planned it a bit.

Now they are hung and stuffed and ready for Christmas morning (which will be tomorrow for us since we are going to be traveling for the holidays but still wanted to have AJs first "Christmas" be in our new house!)

T-Shirt Monstar Pot Holders

Materials Needed:
• old t-shirts or scrap material
• quilt batting
• sewing machine & thread
• needle & thread
• scissors




*close up


*close up

To make these fun little pot holders I grabbed some of my scrap t-shirt material and picked the one I wanted for the background and cut out a "square" (no exact measurements again). I used that first one I cut out as a template to cut out another of the same fabric and 2 of a different fabric for the back. Next, using my template, I cut out some quilt batting the same size (you will need at least 2, I used 4 because I wanted mine to be well insulated). I machine sewed the bating to the fabric, right side of fabric out. I did this for the other 3 sides as well. Then I took my 2 front pieces and cut out shapes from my other scrap t-shirt material and made my monstar on top. When I got it the way I wanted it I hand stitched the monstar onto the top fabric and top batting. When I was finished I put the monstar facing down on top of the back piece facing up (right sides together) and stitched with my machine all the way around leaving a large gap to flip it inside out. The first time I didn't leave enough space to flip it forgetting how bulky it would be with the 2 layers of batting so I had to seam rip it and re-sew. Then once it was flipped inside out I hand sewed it shut.

Duct Tape Monstar Bookmark

Materials Needed:
• Duct Tape
• craft knife
• self healing cutting board
• paper & pencil


* front & back

This project is similar to the Duct Tape Monstar Coaster project I did earlier, only this time I made a cut out book mark that I so often find myself needing.

Once again I recommend the self healing cutting board this way you can stick the duct tape down and cut the shape you need with your craft knife.

To start I sketched out the design keeping it more vertical than horizontal. Then I used that to make some templates out of paper. Then I grabbed the color of Duct Tape I wanted to be my background and taped down a few strips overlapping about the width and height of how I wanted the book mark to be then I flipped it over and taped the other side so that I was left with the colored Duct Tape showing on both sides. Then I took the colors I wanted the body of my monstar to be and placed it down on the self healing cutting board and placed my template on top and cut out the monstars body. Then I peeled it up and placed it on the background piece. I continued this method until I had the entire front of the monstar done. Then I cut out around the entire monstar.

Once he was cut out I then turned it around and prepared to do the back side of my monstar. I started the same why by putting the Duct Tape down on the self healing cutting board but when I got to the template part I flipped it over to the wrong side facing up. Then I cut out my shapes and placed them on the back side of the background. Now my monstar is ready to snuggle up with a nice good book.

Duct Tape Monstar Coasters

Materials Needed:
• duct tape
• craft knife
• scissors
• self-healing cutting board



Duct tape is always a fun medium. For this project I highly recommend working on a self healing cutting board because you can stick the duct tape down on it to cut it and peel it off easily.

To start I got my self healing cutting board and taped strips of one color of the duct tape to make the background once I had one side down I flipped it over and placed strips of the same color down but in the opposite direction (ie. if you laid your first ones down horizontally the other side was laid down vertically giving it a more secured base). When I had a big enough area covered in duct tape front and back I cut out a square (this would be the size of the final coaster). Once that was done I created my monstars using by laying down a few strips of color for the monstar base and then I cut it out to the shape I wanted. Then I placed it on top of the square and trimmed off any that wasn't on the square. Then I added a duct tape boarder in a different color. To do this I just laid out a piece of duct tape and cut it in half length wise, then taped it on the sides and folded it over to the back. Then I would tape down a piece of the desired color and cut out little details that I wanted to add.

What is nice about working with duct tape- if you place something and want to change it you can easily pick it up and move it.

Felt Robot Monstar

Materials Needed:
• felt (assorted colors)
• embroidery needle
• embroidery thread
• googly eyes
• fiber fill
• hot glue & hot glue gun



To make this little robot monstar I started off with a sheet of light blue felt and a darker blue felt (for the back of this monstar). I drew the shape of the monstar that I wanted and then cut out both the light blue and dark blue felt giving me 2 of the same shape pieces. Next I placed the mouth and heart on and sewed them to the front of the light blue felt.

Then I grab both the light blue felt cutout and the darker blue felt cut out and I put them wrong sides together (right sides facing out). Then I got white embroidery thread and my embroidery needle and did a blanket stitch all around the robot, stuffing it with fiber fill as I went (you may need a chopstick to push fiber fill into smaller areas). When I finished sewing all the way around I got 2 different sized googly eyes and hot glued them on. Voila a cute little robot monstar!

Hand Monstar Puppet

Materials Needed:
• fleece (3 different colors)
• yarn
• googly snap on eyes
• fiber fill
• sewing machine & thread
• sewing needle & thread


* front


* back


* action shots

My brother's birthday is coming up and he wrote me asking if I would make him a puppet for his birthday. He asked for a moving mouth (most important he said), arms and something about wires (I didn't add wires-hope it works out ok for him). Having never made a puppet before (minus maybe a brown lunch bag puppet when I was a child) I really had no idea where to start. So I went searching on line and ended up finding a cool make your own monster puppet which looked really awesome so I ordered one for him and thought it would be a fun thing for him and his daughter to do together. Finished...or so I thought. But the idea kept spinning in my head how would I make a puppet; where would I start. So after many days of thinking it this is what I came up with.

First, I took the blue fleece and doubled it onto itself and drew the basic shape of my hand with my thumb tucked in, then I cut it out about a 1/2 in. on all sides (for sewing and for extra fabric inside).Now I had 2 pieces of the same shape. Then I took one of those pieces and figured out where the top of my thumb would hit and I marked it and then giving about 1/2 in. extra I cut it out following the same curve I had before. Then I took my two blue pieces and lined them up on top of each other and figured out where it would open for his mouth. Next I got my red fleece and cut out the mouth using the blue pieces open as a template (I am one of those "eye ball it" type crafters- no exact measurements here).

Once that was all cut, I went back to my blue fleece (doubled up again) and cut 2 crude arms with "hands" (just the area where his hands are gets bigger). Now I had 4 arms (2 fronts and back) and then I took it all to my sewing machine.

First, I took the arms and pinned them front to back and sewed them on the sides and hand area leaving the bottom un-sewn so I could stuff it. After both were sewn I then stuffed them with the fiber fill. Next, I pinned the 2 blue pieces together and then I pinned the arm in (I started with just one side than I did the other). With the arm I had to make sure it was tucked into the middle of the blue fleece so that when it was done being sewn and turned inside out his hands would be showing,(if I had them facing out then when I turned it inside out it would be on the inside). Then I stopped pinning where the mouth would start (telling me to stop sewing). I sewed one side then the other (pinning the next arm once I had finished the first side). Now I was left with the mouth I pinned it on and sewed it up.

Next, I flipped him inside out and got my goggly snap on eyes and placed them where I thought looked right, once I found that place I marked it and then cut a tiny slit into it, slid my eye in and snaped on the back part. Next I got some scrap yarn and took it and wrapped it around my hand several times. Once I got enough "hair" I took it off my hand and cut it in half then I took my needle and thread and hand stitched it onto his head when he had his hair finished I gave him a hair cut, mainly cutting any that were a lot longer than the rest. Lastly, I cut out an orange tounge and hand sewed it into the mouth using a slip stitch.

Once it was finished I had to of course play with it to test it out. It isn't the best puppet in the world but it was simple to make and lots of fun to play with. Reminds me a lot of The Muppets or Fraggle Rock.

Embellished Work Apron

Materials Needed:
• apron
• computer
• Dark t-shirt transfers (I use Avery Ink Jet Dark T-shirt Transfer paper- I like theirs the best- plus I have an ink jet)
• printer
• silk flowers
• thread & needle
• beads




*detail

This project came along because I really needed an apron. I am always doing messy crafts and never fail to get it all over my clothes, so instead of having to change clothes I decided an apron was the way to go. So I bought a cheap all black apron and decided to embellish it with a few touches.

First I found some silk flowers that I had from a table decoration that was at my friends wedding and I thought I would like to sew them onto the sides of the pockets (it felt more magical that way). So I took the flowers apart. Taking the stems off and then popping apart the middle part of the flower and was left with petals with a hole in the center. To attach these I got some thread and knotted it then started from inside the pocket and brought my needle up then I placed 2 set of petals through the needle and then a small bead then brought my needle back through the other side then went back up and placed another bead and did that until I had 3 or more beads for the center of the flower.

Next I went to my computer and drew up a monstar for the pocket (he is supposed to be a helper monstar handing me glue, pencil, scissors, paint brush- you know whatever I need :) Then I also made some text that spelled out Monstar Maker and then once that was all designed I printed it out on a quality print setting.

Once it was printed I cut out my designs leaving a white boarder around my little monstar helper. The text already had a white box around it so I just cut out the box. Then I took my monstar and placed him where I wanted him and ironed him on according to the directions from the transfer paper and then did the same for the letters. Now this didn't come out perfect but I still wanted to post it. I think either the iron was set too high or the fabric dye maybe came through the iron on so it has a sort of dirty look to it but I figure it is just gonna get dirty anyway but it was a fun and simple project and now I have a handy dandy work apron!

Recycled Paper Mache Vase

Materials needed:
• empty plastic container (I used my old Mod Podge bottle)
• newspaper
• white glue
• water
• paint
• hot glue (optional
• googly eyes (optional)



This idea came from my Ready Made Magazine this month. They made paper mache vases out of old plastic containers. I of course wanted to make my own so I decided to make a monstar case.

To start this project I cleaned out my Mod Podge container getting all the gunk out and taking the label off and using some Goo Gone to get rid of the sticky parts. Once it was washed and dried I made a bowl of 50/50 white glue and water mixture and tore my news paper into strips. Then I dipped the newspaper stripes into the glue/water mixture and placed the strips around covering the whole area. Once completely covered I let it dry.

Once it was dry I got my stripes of newspaper and bunched it up to make a nose. Then I used small stripes of the glue/water covered news paper and placed it over the nose until it was well connected to the bottle. I did this for the mouth and the nose and mouth on the other side (it's a 2 headed monstar). Then I let it dry for a long time (the bunched up part takes longer to dry but you want it completely dry before painting to avoid mildew).

Once it was dry I painted a white base coat of acrylic all over and then once that was dry I painted the vase how I wanted it and then when that was dry painted a layer of Mod Podge. When all of that was dry I hot glued googly eyes on it.

You really can have as much fun as you want with this. Paint it one color or paint a picture, add embellishments like ribbon, glitter, jewels, wire, shells, whatever really.

Sock Monkey or Sock Monstar

Materials needed:
• pair of socks (or more)
• sewing machine & thread (or hand sew)
• buttons, googly eyes, felt, embroidery thread (for details)
• fiberfill
• chop stick (or long thin object to stuff arms and legs with)







So who doesn't wonder what to make with a pair of socks? The top 2 pictures is of my version of a sock monkey I made for my husband- this was the very first thing I made of socks! The bottom photo is one of my sock monstars (this is my little sis'). I got the idea for sock monstars from a book my big sis got me called Stupid Sock Creatures: Making Quirky, Lovable Figures from Cast-off Socks (great book for the know how and creativity inspiration).

Sock Monkey How To:
To start the sock monkey I chose my socks (I got a pair of long socks because I wanted this monkey to be able to hug my husband tight) then I laid it out with the heel side down and flattened it out the best I could. Then I cut a line in the center of the leg part of the sock from the part where you put your foot in to until about an 1.5 inches from the heel of the legs to create the legs. Once they were cut I went to the sewing machine and flipped it inside out then stitched the bottom of his legs and then up the inside of his legs leaving the crotch area to flip and stuff the monkey with.

Once his legs were sewn, I flipped the monkey inside out and I got some fiber fill and filled in the monkey (legs first- using a chopstick to stuff it into the bottom). Then stitched his crotch up using a slip stitch.

Next I got the other sock and cut off the heel (for his mouth) and 2 arms (the same way you did his feet) and then cut out 2 sets of ear shapes (4 total because your sock will have 2 layers you cut at once).

For the arms I sewed them inside out leaving one side open to stuff and sew to the monkey. For the ears (there are 2 so you will do this twice) I sewed them inside out all the way around leaving one side open so I could stuff it a bit and sew it onto the monkey head.

Once I had my arms ready I turned them right sides out and stuffed it using a chop stick and folded it under on the sides then did a quick hand stitch just to help it stay then placed it on the monkey and did a slip stitch around the arm twice securing it to the body. I did it again for the other arm.

Next I added the mouth (the heel part of the second sock). Here I folded over a small edge all the way around and flattened it then placed it where I wanted and did a slip stitch around it stopping with enough room to stuff his mouth then I finished sewing it up. Then I went to the ears and stuff them a little bit and again folded a small part all the way around and slip stitched it onto the monkey head. Then I got my embroidery thread and made a quick mouth crease by coming from one side to the other and then tying it off. Lastly I added black buttons for eyes (you can of course use anything you want- googly eyes, felt...ect).

Sock Monstar How To:
To create the sock monstar you use the same principles as the monkey but with a lot more creativity! Here instead of using the toe part of the sock for a head I cut it into a diagonal giving it more attitude (in my opinion at least). Also instead of leaving the heel of the first sock on the back I used it on the front and made it into a sewn down mouth (this came from the book: Stupid Sock Creatures: Making Quirky, Lovable Figures from Cast-off Socks) and I added a pink felt tounge sticking out. Then I did the arms the same as the sock monkey arms I just used different socks to make them. For the eyes I used googly eyes but I sewed them to a patch of hot pink felt that was eye liner and lashes for this girly monstar. Lastly I added some white felt wings so this monstar could fly. What is just so great about this is that you can pretty much do anything. I have added tails big heads, teeth, clothing, all kinds of stuff. It is just so much fun and not too difficult either.

Recycled Scrap T-Shirt Monstars

Materials needed:
• scrap material
• snap on eyes (available at craft stores)
• sewing machine (optional- can be hand sewn) & thread
• felt (optional for details- you could also use fabric paint or embroider details)
• yarn (optional for hair or other details)
• ribbon (optional for details)






Another super simple and fun project to do with some scrap pieces of fabric!

I made the top one out of scraps from my little sister's t-shirt purse I made her (the t-shirts were one's that she no longer fit in). The bottom one was just some scrap material I had lying around.

The idea is simple. I quickly drew a random shape and cut out 2 from either the same fabric (like in my second one) or different fabrics (like in the first one) and sewed all around the edges leaving a small space to flip it inside out. Once it was sewed clip around the curves (I normally clip the edges a lot when working with t-shirt material because it won't unravel). Then I flipped it inside out.

Next I added face details. With these 2 monstars I made felt mouths (including teeth on the bottom monstar) and then I got these plastic snap on eyes that you can get then at fabric and craft stores (what I love about these is they are super simple but instantly give it some personality). To attach the eyes you simply cut a small slice where you want them to go and then place the top of the eye through the hole and then using your opening on the bottom put your bottom eye attachment on to snap tight and keep the eye in place. You can also use buttons or felt or whatever you have lying around that would work for your monstar (that is one thing I love about making monstars is that no one knows what they are supposed to look like so you can make them look like whatever!)

After the face is done you can add little details like a belly, hair (on my bottom monstar), bow (on my top monstar) or whatever (again open to your interpretation). To make the hair I used some scrap yarn I had and cut it into longish stripes then sewed it down, when that was done I gave him a hair cut and styled it short and punky! For the belly I just sewed on a felt oval shape, The bow was a scrap piece of ribbon that I tied and then hand stitched on.

Once all the details are done I stuffed it using fiber fill (you can also use scrap material or whatever is soft and fluffy and you have lying around. Fill your monstar up and then sew it shut using a slip stitch. Now you can cuddle with your cute little homemade monstar!

Recycled T-Shirt Baby Quilt

Materials needed:
• 6-12 old t-shirts (or scrap material)
• sewing machine & thread
• embroidery thread
• batting (or old sheet or fabric)
• scrap fabric for borders
• yard or so of fabric for back
• patches (optional)
• felt (optional)
• yarn (optional)




close up view

I am one of those people who feels emotionally attached to my clothing, so I always had a hard time cleaning out my closet when the time came. Even though things wouldn't fit I just couldn't help but wanting to keep them because inevitably they reminded me of some time in my life. So instead of letting them just sit in my closet and never see the light of day I decided to make my husband and I a quilt out of them. The original one is a huge and it took me 2 years to finish (note: I worked on it on and off for the 2 years mainly waiting to collect enough old clothes in the process but I think if I was diligent on it and had all the scraps I needed it would have taken me about 4 months).

This one above took me about 3 days. It is a small version that I made for my little Zoe, while I was pregnant. I really loved the idea that she would sleep with our shirts and smell and be "protected" by us. I have made this baby blanket sized quilt a few other times and don't find it to be too hard to do with a little time and patience.

To start I gathered scraps of t-shirts from our other quilt but chances are you don't have that so you can either use scrap material you have or just gather 6-12 t-shirts that you no longer wear any more but have some attachment to. Then I got a piece of scrap foam board (anything thing and sturdy will do I used it as my template) I measured out how big I wanted the squares. In this one above there are 2 different sizes a smaller square and a larger one. I made the smaller ones 1/2 the size of the larger one and added a 1/4 in seam allowance (meaning the bigger one was 8.5 in sq and the smaller one then would be 4.25 in sq plus the 1/4 in for the seam allowance giving me 4.5 in sq). . Another great idea I have seen is that you just cut long strips and sew them together which gives it a fun stripy look. You of course can do just about anything you want- shapes, colors, whatever you can think of.

So after making my templates I grabbed my shirts and placed the template right on top and then used my rotary cutter and cut around the template (you can also mark it with sewing pencils or chalk and then cut on your line). Once I had enough to lay it down (the total size of my quilt with out the border was 27.5 in x 36.5) I laid out the pieces the way they looked best to me. I just did a simple pattern here of a big square, 4 small squares, big square, 4 sm. sq. across and then switched it for the next row and made it 4 sm sq, big sq, 4 sm sq, big square and again for the next row I switched it back. Ending with 4 rows across and 4 rows down (and a row I count as the size of my big square).

Once they are in position the way I like them I take one section of the 4 sm sq and sew those together to make a piece that is as big as my bg sq. I do this for all my sm sq until they are all in big pieces. Then I pin my first row together and sew it. Then I take my second row and sew it and then the third row and sew it. Then I pin the first row to the second row and sew and then that piece gets pinned to the 3rd row and I sew it.

Once that whole center piece is done I then find a scrap fabric to make a border on my edges (normally this means it will be a mix of colors but you can of course finish it off with the same color and fabric or whatever is easiest for you). For the border on this one I used 2 inches thick of material and sewed it to my shorter sides all the way up. Then I trimmed off the excess material (I didn't do any measuring lengthwise because when I do I inevitably end up with miss matched pieces in the bad way- this is how I avoid any problems). I did the same to the other short side (I did this so my sides would look the same but you can just work your way around if you want- going from short side to long side to short side to long side or if you know how you can even make diagonal cornors). Once the 2 short sides were done I did the long sides.

When your border is finished I then added a little batting. I used the batting (from the fabric store) I had left over from my other quilt but if you want you can also use old sheets or old curtians- whatever. Then I laid the quilt onto the batting with the quilt facing up. I smoothed it out and pined it using quilt safety pins. The reason I use those is because they don't rust out in time and this project can take a while (like my 2 year quilt). Then I trimmed it down to about the edge of my borders just to make it easier to work with.

Next I got embroidery thread (leaving it as 6 strands but you can make it as thick as you want) and did a simple stitch around where I sewed my t-shirts together, sewing the t-shirts to the batting. I loved doing this chunky hand stitch because it really looks hand done and has a quirkiness about it.

Once I sewed all of my squares to the backing I then trimmed down the batting about 1/2 in from the edge of the border all the way around (I leave it on at first just in case I pull on the batting and end up too short on one side). Then I added my monstar and dragonfly. To do the monstar I just cut the shapes out of felt and fleece remnants I had and then hand stitched it to my quilt before finishing it off I got a little bit of fiber fill and stuffed it making it 3-D but plush still. Then I got some patches (a dragonfly and flower) and hand sewed them on.

When the decorating is done I got a large section of scrap fabric (it measured over the final size of my quilt) from my other quilt or you can buy about a yard of a soft fabric (measure your final piece and make sure to get enough fabric for your piece) or just sew a couple of larger scraps together. Then I pinned it with right sides together and started sewing starting the edges together leaving an opening for me to flip it inside out.

Once sewed I trimmed the corners so they would lie flat and then flipped it inside out. Then I pinned the border down and sewed (stitch showing) around my border close to the t-shirt part. This helps it attach to the back piece of fabric better. Then I hand stitched my opening closed using a simple slip stitch and it was finished. If you are making a larger quilt I recommend getting some scrap yarn and sewing little knots on the corners of your squares to tie them to the fabric below. On the small quilt this doesn't matter as much but the larger the quilt the more stability you need to keep the 2 pieces from sliding around.

Hand Embroidered Card

Materials needed:
• blank cards and envelopes
• needle
• embroidery thread
• awl (optional)
• scrap paper










So this is a project I did a while back but I still really like it. I love to embroider and came up with an idea to embroider a greeting card.

To do this project I got a set of blank cards and envelopes. I then drew out a picture on a piece of scrap paper and used a awl (you can also use any sort of sharp pointed object) to poke holes around my image where I wanted to embroider. Then I got my embroidery thread (color of your choice) cut it fairly long and then pulled out 2 of the threads (they normally come in 6 thread strands). Then I made my knot and started embroidering with a simple back stitch and went around my pattern. Then tied it off with a knot again and trimmed the string. It was pretty simple and the back even looks good since you have holes to follow so it keeps it clean. For a really simple project you can even take it to your sewing machine and just sew fun lines all over with a fun thread and finish it by trimming the thread or even let it fly free.

Monstar Finger Puppets

Materials needed:
• felt
• fabric paint
• sewing machine
• thread

So I was watching Martha on the DIY network and she made these little bug finger puppets and of course I had to make it a monstar!

So what I did was traced my big finger onto felt and then sewed it larger than that (because it loses some space due to extra fabric inside) and then I painted it's face on using fabric paint. One day I will add more to them like arms possibly but I even love the simple ones. Here are the photographs (the photos are blurry, I took it with my phone). It is a really simple project and I feel like anyone can do it!

Monstar Onesies

Materials Needed:
• blank onesie
• embroidery thread (colors of your choice)
• felt (fleece can also be used but felt is better)
• embroidery needle
• embroidery hoop

So I decided to create a blog of the many crafts I find myself getting sucked into. To start I will introduce you to some of my Monstar Onesies. These were started when I was pregnant and decided to make some embroidered onesies for my little Ethan.

To start I bought a 5 pack of onesies from the store and several colors of felt and white embroidery thread. I cut the monstars out and placed them on the shirt until I found something I liked the look of (later on I would sketch out monstars and then create them- though they always look a bit different once they are finished). Then tried to sew as much together as possible before sewing it onto the fabric (to minimize thread knots) and then sewed it on the onesie using an embroidery hoop to keep my fabric taught. Then with some of the details I used embroidery thread and different embroidery stitches to create different looks. Here are a few samples of ones I have made.