Scrap T-Shirt Rings

Materials Needed:
• scrap t-shirt material (or any material that will not unravel)
• beads
• needle & thread
• hot glue
• googly eye





So this idea came from having a bunch of tiny scraps and wanted to use them. All I did was grab a thin long strip of t-shirt and put around my finger and tied a double knot. Then I wrapped the rest of the material around the knot and took a straight pin and pinned it into place. Next I grabbed my needle & thread and started it going up through one of the overlapped areas. Once I was up through the material I placed a bead or 2 on top of the needle and went back down into the material. I did this all the way around the ring until I had a beaded area. Next I heated up my glue gun and got a googly eye then glued it right onto the top. Now I have a googly eye bling ring.

T-Shirt Pillow

Materials Needed:
• T-shirts
• pillow form or fiber fill
• sewing machine & thread
• hand needle & thread
• scrap fleece


*front


*back w/ pocket

Another craft made from my little sis' old tees...a pillow. It's super easy and a great gift or a great way to add some fun to your couch or bed.

First I went to the craft store and bought a pillow form the size that I wanted (I chose a 14 x 14 in. pillow). Then I grabbed an old t-shirt and measured it out (one of the few times I measure). The shirt was too small to fit the 14 x 14 pillow so I cut it out as big as I could 12 x 12 in. Next I took a few scraps of t-shirt from the purse project and measured out borders to go around the center piece. Then I sewed one side of the border on and then the opposite, once they were sewn I trimmed them down to measure 14.5 in. across (it is 14.5 because I need 1/4 in seam allowance on both sides). Next I took my other 2 side pieces and sewed them on and trimmed them to measure 14.5 in across.

Once that side was done I used it as my "template" for the other side which I wanted to be a bit more angled and fun and not so straight forward. So I just took 3 strips of fabric from 3 different shirts and sewed them at angles. Then I took my "template" and placed it on top right sides together and trimmed them to match. Then I went to the sewing machine and stitched up the 3 sides leaving the last side open to put the pillow in. (If you chose not to use the pillow form than I would sew up most of the 4th side leaving a space big enough for your hand to fit through).

Next I took my scrap fleece in red and cut out a pocket for the pillow (I really like pockets in pillows and blankets). Then I hand stitched it on using a back stitch, I stitched the top of the pocket but didn't stitch it to the pillow, I just wanted it to look more finished. Then I placed the pillow form inside and stitched up the bottom by hand using a slip stitch. Now I have a new pillow!

Reversible T-Shirt Purse

Materials Needed:
• T-shirts (I used 9 but I think you could do this with 2 or 3)
• Sewing machine & thread
• 2 buttons (optional)
• needle and thread (optional)


*one side front & back


*the other side front & back


*strap detail

Recently my little sis cleaned out her closet and I snatched all of her awesome t-shirts (I just imagined all the fun things I could make). This t-shirt purse is my first project using those old t's. I didn't use a pattern and it is pretty thrown together but I would rate this project intermediate.

To start I grabbed the 3 different shirts that I wanted to be the one side and I grabbed my scissors and cut out how big I wanted my bag to be out of the green and brown t-shirt then I took the blue shirt and cut it out the same width and then cut out the height I wanted it to be (which ended up being a little less than half the height). This will also be my "template" for the patched side.

Next I took about 6 other t-shirts and cut out strips of their decorated sides and sewed them together side by side until I had enough to make the front and back of the purse. Then I took some scraps and cut out a couple of strips for the flap of the purse and sewed them together. Then I placed my original shirts on top of my stitched up ones and cut it down to size (great measuring I know). Once this was done I sewed up the sides and bottoms of my 2 purses and then I grabbed a small thin scrap (to be the button hole) and pinned it to the flaps (facing in- so when I flipped it inside out it would be showing on the right side; my flaps are right sides together) then I sewed the 2 flaps together (I would say if I did this again I would have sewn the tops onto the flaps first but I sewed them on later). Then I folded the top of the bag down about 1/4 in. and ironed it (I did this to both bag (not flap) pieces).

Next I made the strap. I used the extra pieces I had from cutting off the excess from the patched side and just sewed them together with a bunch of curvy and straight lines. To get the different colors I made my bobbin thread blue and my top thread yellow and flipped it over to get both the stitch colors on each side.

Then I took placed the patched purse inside of the solid purse wrong sides together and pinned it. Then I placed my straps inside the 2 pieces (the patched and the solid purses) and also put the flap inside the 2 pieces (again if I were re-doing this I would have those sewn on already). Then I stitched it all together (stitches showing) and then flipped it over and stitched another line as well (just for good measure and to make both the yellow and blue thread show).

Finally I placed a button where it should lay according to my button hole sewn onto the flap, and I put the needle through. Once it was on the other side I grabbed another button (it's reversible so we have to have one on the other side) and placed the needle through one of the holes and then I continued to stitch both buttons on. Now I can turn it either way and I have a fun new bag!

Recycled Paper Mache Vase

Materials needed:
• empty plastic container (I used my old Mod Podge bottle)
• newspaper
• white glue
• water
• paint
• hot glue (optional
• googly eyes (optional)



This idea came from my Ready Made Magazine this month. They made paper mache vases out of old plastic containers. I of course wanted to make my own so I decided to make a monstar case.

To start this project I cleaned out my Mod Podge container getting all the gunk out and taking the label off and using some Goo Gone to get rid of the sticky parts. Once it was washed and dried I made a bowl of 50/50 white glue and water mixture and tore my news paper into strips. Then I dipped the newspaper stripes into the glue/water mixture and placed the strips around covering the whole area. Once completely covered I let it dry.

Once it was dry I got my stripes of newspaper and bunched it up to make a nose. Then I used small stripes of the glue/water covered news paper and placed it over the nose until it was well connected to the bottle. I did this for the mouth and the nose and mouth on the other side (it's a 2 headed monstar). Then I let it dry for a long time (the bunched up part takes longer to dry but you want it completely dry before painting to avoid mildew).

Once it was dry I painted a white base coat of acrylic all over and then once that was dry I painted the vase how I wanted it and then when that was dry painted a layer of Mod Podge. When all of that was dry I hot glued googly eyes on it.

You really can have as much fun as you want with this. Paint it one color or paint a picture, add embellishments like ribbon, glitter, jewels, wire, shells, whatever really.

Recycled Jar Lid Collage

Materials needed:
• jar lid (mine had about a 3 in. diameter)
• Mod Podge
• paint brush
• scrap paper
• scrap ribbon
• scrap felt
• photo (I printed mine out after resizing it to fit into the 3 in. jar lid)
• cardboard scraps
• glue on jewels
• hot glue




This idea sort of came to me after finding this lids that I had saved to one day do a craft project with (that was like 3 years ago) and so I decided it was time to use them. At first I just Mod Podged the pictures in and painted the Mod Podge on top and added some of the jewels. It looked alright but I wanted to add an element of fun to it, so I went back to the drawing board and came up with the idea of a 3-D collage lid.

First, I got a picture of my husband and I at our wedding and printed it out (sized to fit my 3 in. diameter). Then I traced the lid onto a sheet of scrap paper and cut a circle out (cutting inside the edge a bit so that it would fit). I did this to the polka dot paper and the pink tree paper-both being cut into circles. Then I put the polka dot one for the background in the lid and used Mod Podge all over. Then I took my pink paper and drew a tree shape on the back side and cut it out. Then I used the Mod Podge and placed the tree inside the lid.

Next I took the photo and cut out the background and cut the bottom into a circular shape to fit the lid. I glued the photo to a scrap piece of cardboard and then hot glued it into the lid. Then I cut out a heart out of some orange scrap paper and painted some glitter on it then glued some thinner cardboard to it and glued it behind out heads. Then I got some glue on jewels and made little blossoms for the tree.

Then I got some scrap ribbons and took a white one with wire and scrunched it around the back hot gluing as I went. Next I took a thin ribbon and glues it on the edges of the lid. To finish the back I cut out a felt circle and hot glued it to the back of the lid.

I am not sure yet what this will be but it can be a magnet by gluing a magnet on or I may hang a piece of ribbon from it and make it a hanging picture or an ornament for our tree this year. Not sure yet but there are a few possibilities for sure.

Decoupage Box

Materials needed:
• box
• scrap paper
• Mod Podge
• paint brush/sponge brush



This project came about yesterday morning when I picked up a box of my stamps and it fell apart. I decided to decoupage it using some old scraps of paper left over from a scrap book I made my little sis and news paper.

First, I cut the box top off (I used a shoe box that had a flip top-some have a removable top and then of course you don't have to cut it off) and then I proceeded to paint the Mod Podge on a small area and then placed scraps of paper down and brushed the Mod Podge on top. (I really love Mod Podge- it's a glue and a sealant!) I continued doing this until the whole bottom and top of the box were covered (I included a piece with stamps stamped out on it to let me know what was in the box). When it was all dry I took some book binding tape (I had some but if you don't you can use duct tape) and taped the top back on. I did it this way because when I try to leave the top on it inevitably seems to get so thick on the hinge I can't shut it. Then it was finished and I could place my stamps inside their new sturdy box. What is great about this box is that if I decided to change the contents I can just make a new piece with the content title and use my Mod Podge on it and voila- a new box.

Recycled Scrap T-Shirt Monstars

Materials needed:
• scrap material
• snap on eyes (available at craft stores)
• sewing machine (optional- can be hand sewn) & thread
• felt (optional for details- you could also use fabric paint or embroider details)
• yarn (optional for hair or other details)
• ribbon (optional for details)






Another super simple and fun project to do with some scrap pieces of fabric!

I made the top one out of scraps from my little sister's t-shirt purse I made her (the t-shirts were one's that she no longer fit in). The bottom one was just some scrap material I had lying around.

The idea is simple. I quickly drew a random shape and cut out 2 from either the same fabric (like in my second one) or different fabrics (like in the first one) and sewed all around the edges leaving a small space to flip it inside out. Once it was sewed clip around the curves (I normally clip the edges a lot when working with t-shirt material because it won't unravel). Then I flipped it inside out.

Next I added face details. With these 2 monstars I made felt mouths (including teeth on the bottom monstar) and then I got these plastic snap on eyes that you can get then at fabric and craft stores (what I love about these is they are super simple but instantly give it some personality). To attach the eyes you simply cut a small slice where you want them to go and then place the top of the eye through the hole and then using your opening on the bottom put your bottom eye attachment on to snap tight and keep the eye in place. You can also use buttons or felt or whatever you have lying around that would work for your monstar (that is one thing I love about making monstars is that no one knows what they are supposed to look like so you can make them look like whatever!)

After the face is done you can add little details like a belly, hair (on my bottom monstar), bow (on my top monstar) or whatever (again open to your interpretation). To make the hair I used some scrap yarn I had and cut it into longish stripes then sewed it down, when that was done I gave him a hair cut and styled it short and punky! For the belly I just sewed on a felt oval shape, The bow was a scrap piece of ribbon that I tied and then hand stitched on.

Once all the details are done I stuffed it using fiber fill (you can also use scrap material or whatever is soft and fluffy and you have lying around. Fill your monstar up and then sew it shut using a slip stitch. Now you can cuddle with your cute little homemade monstar!

Recycled T-Shirt Baby Quilt

Materials needed:
• 6-12 old t-shirts (or scrap material)
• sewing machine & thread
• embroidery thread
• batting (or old sheet or fabric)
• scrap fabric for borders
• yard or so of fabric for back
• patches (optional)
• felt (optional)
• yarn (optional)




close up view

I am one of those people who feels emotionally attached to my clothing, so I always had a hard time cleaning out my closet when the time came. Even though things wouldn't fit I just couldn't help but wanting to keep them because inevitably they reminded me of some time in my life. So instead of letting them just sit in my closet and never see the light of day I decided to make my husband and I a quilt out of them. The original one is a huge and it took me 2 years to finish (note: I worked on it on and off for the 2 years mainly waiting to collect enough old clothes in the process but I think if I was diligent on it and had all the scraps I needed it would have taken me about 4 months).

This one above took me about 3 days. It is a small version that I made for my little Zoe, while I was pregnant. I really loved the idea that she would sleep with our shirts and smell and be "protected" by us. I have made this baby blanket sized quilt a few other times and don't find it to be too hard to do with a little time and patience.

To start I gathered scraps of t-shirts from our other quilt but chances are you don't have that so you can either use scrap material you have or just gather 6-12 t-shirts that you no longer wear any more but have some attachment to. Then I got a piece of scrap foam board (anything thing and sturdy will do I used it as my template) I measured out how big I wanted the squares. In this one above there are 2 different sizes a smaller square and a larger one. I made the smaller ones 1/2 the size of the larger one and added a 1/4 in seam allowance (meaning the bigger one was 8.5 in sq and the smaller one then would be 4.25 in sq plus the 1/4 in for the seam allowance giving me 4.5 in sq). . Another great idea I have seen is that you just cut long strips and sew them together which gives it a fun stripy look. You of course can do just about anything you want- shapes, colors, whatever you can think of.

So after making my templates I grabbed my shirts and placed the template right on top and then used my rotary cutter and cut around the template (you can also mark it with sewing pencils or chalk and then cut on your line). Once I had enough to lay it down (the total size of my quilt with out the border was 27.5 in x 36.5) I laid out the pieces the way they looked best to me. I just did a simple pattern here of a big square, 4 small squares, big square, 4 sm. sq. across and then switched it for the next row and made it 4 sm sq, big sq, 4 sm sq, big square and again for the next row I switched it back. Ending with 4 rows across and 4 rows down (and a row I count as the size of my big square).

Once they are in position the way I like them I take one section of the 4 sm sq and sew those together to make a piece that is as big as my bg sq. I do this for all my sm sq until they are all in big pieces. Then I pin my first row together and sew it. Then I take my second row and sew it and then the third row and sew it. Then I pin the first row to the second row and sew and then that piece gets pinned to the 3rd row and I sew it.

Once that whole center piece is done I then find a scrap fabric to make a border on my edges (normally this means it will be a mix of colors but you can of course finish it off with the same color and fabric or whatever is easiest for you). For the border on this one I used 2 inches thick of material and sewed it to my shorter sides all the way up. Then I trimmed off the excess material (I didn't do any measuring lengthwise because when I do I inevitably end up with miss matched pieces in the bad way- this is how I avoid any problems). I did the same to the other short side (I did this so my sides would look the same but you can just work your way around if you want- going from short side to long side to short side to long side or if you know how you can even make diagonal cornors). Once the 2 short sides were done I did the long sides.

When your border is finished I then added a little batting. I used the batting (from the fabric store) I had left over from my other quilt but if you want you can also use old sheets or old curtians- whatever. Then I laid the quilt onto the batting with the quilt facing up. I smoothed it out and pined it using quilt safety pins. The reason I use those is because they don't rust out in time and this project can take a while (like my 2 year quilt). Then I trimmed it down to about the edge of my borders just to make it easier to work with.

Next I got embroidery thread (leaving it as 6 strands but you can make it as thick as you want) and did a simple stitch around where I sewed my t-shirts together, sewing the t-shirts to the batting. I loved doing this chunky hand stitch because it really looks hand done and has a quirkiness about it.

Once I sewed all of my squares to the backing I then trimmed down the batting about 1/2 in from the edge of the border all the way around (I leave it on at first just in case I pull on the batting and end up too short on one side). Then I added my monstar and dragonfly. To do the monstar I just cut the shapes out of felt and fleece remnants I had and then hand stitched it to my quilt before finishing it off I got a little bit of fiber fill and stuffed it making it 3-D but plush still. Then I got some patches (a dragonfly and flower) and hand sewed them on.

When the decorating is done I got a large section of scrap fabric (it measured over the final size of my quilt) from my other quilt or you can buy about a yard of a soft fabric (measure your final piece and make sure to get enough fabric for your piece) or just sew a couple of larger scraps together. Then I pinned it with right sides together and started sewing starting the edges together leaving an opening for me to flip it inside out.

Once sewed I trimmed the corners so they would lie flat and then flipped it inside out. Then I pinned the border down and sewed (stitch showing) around my border close to the t-shirt part. This helps it attach to the back piece of fabric better. Then I hand stitched my opening closed using a simple slip stitch and it was finished. If you are making a larger quilt I recommend getting some scrap yarn and sewing little knots on the corners of your squares to tie them to the fabric below. On the small quilt this doesn't matter as much but the larger the quilt the more stability you need to keep the 2 pieces from sliding around.

Star Seed Ornament

Materials needed:
• clay (I used Sculpy and it worked but the guys recommended oil clay)
• plaster of paris
• aluminum pie tin
• oil (I used olive oil)
• junk mail (I love that about this project- a use for junk mail)
• seeds (I used a wild flower seed mix)
• powdered tempra paint (optional)
• hemp string
• white glue
• clean sponge



So my son would have been 2 this year (he was stillborn on May 26, 2007), so for his birthday this year we decided to name a star after him. I had seen this craft show where they made ornaments out of paper pulp and mixed seeds in with it. I loved this idea because it was a beautiful idea of creating life in memory of my child. So I made this simple star paper pulp ornament that was mailed to our family along with where the star we named after him was located and then when they were done with the ornament the flowers from it will hopefully grow and be a reminder of their nephew/grandson/cousin that they lost.

To start decide what shape of thing you want to create. In my case it was a simple star but the guy who I saw talk about it did a butterfly. You can go more complex with it if you want- adding dimension and detail, your imagination is your limit. I also recommend making 2 of the shapes you want so that way you can make 2 ornaments at a time. Next I baked my stars according to the directions on the clay (I used Sculpy which is a oven bake clay- I am not sure you need hard clay that is just what I did- feel free to experiment).

Once the stars were done I grabbed my shapes, my pie tin, my oil, and my plaster of paris and measured out the plaster of paris according to the directions. I mixed it up and pour it slowly into the pie tin. I had bubbles in it and they said to tap it to get them out. I couldn't get them all out but it didn't affect my end result. Once I had about the plaster about 3/4ths of the way filled I then put olive oil on my shapes that I baked and placed them in the plaster of paris. They didn't go down as far as I wanted it to so I placed some small bits of clay on top to give it a bit more weight. In about an hour I took my shapes out and let the plaster of paris dry for another 23 hours.

Once my plaster of paris was dry I oiled the mold up and I gathered my junk mail and ripped it up (good therapy I tell ya) then placed it in the blender til it was half full. I then filled the rest of it up with water. Blended it and got wet pulp. Next I added the tempra powder (your choice of color) and ran the blender once more. (Now this is the messey part) I then grabbed a handful and gently squeezed over my sink to get most of the water out. I kept doing this until I felt like I had a good amount of it for the mold then I added a bit more of the wet pulp and a sprinkle of seeds. Then I squished it into the mold. Next I got my sponge and pushed it on top of it and got as much water as I could. Then again I worked the pulp mixture into the mold until I was happy with it then I placed it outside under the sun to heat it (this gave them a more muted look to it) you can also put it by a fan and let it sit there for a long time (this is why I recommend doing more than one mold).

Once they were dry I pryed it out with a craft knife (really easy once it is dry) then I painted both sides of the ornament with a mixture of 50/50 water/white glue solution. Then when that was dry I glued a loop of hemp string onto it to create the finished ornament. Then I packaged them up with a hand made card and then sent them out. We only sent out 8 of them but we got amazing responses from it. Mine has already started sprouting!!

Recycled Journal

Materials needed:
• thin cardboard
• thick rubber band
• stick from the yard
• brown paper bag (or whatever paper you want to cover it with)
• news paper (again your choice of paper)
• blank paper for the pages on the inside
• glue (I used glue stick and Mod Podge since that was what I had lying around)
• craft knife
• hole punch

I also added these materials for mine:
• thick cardboard from a box I got in the mail
• some scrap brown paper
• scoring tool
• hot glue and hot glue gun



My mom got this magazine in the mail the other day and it had a cute craft inside that I just had to do. It's a homemade recycled journal for father's day (I think it would even make a cute scrap book or really any sort of book- like one with your recipes in it - yum!). What I love so much about this project is that it cost me nothing- just supplies I had lying around my house and yard!

I took my own liberties with it and made it mine.

To start this journal, I got my thin cardboard out. The board I was using was already cut to size but if you have a big sheet of it cut into the dimensions you want your book to be. Mine is 8.5 x 5.5 inches. Make sure you have 2 pieces the same size for your book. What I did next was punch 2 holes on one side of each of my thin cardboard pieces. I used a grommet punch (I got it from a fabric store a while back). Then after doing that to both pieces I got my craft knife and cut thin strips about an inch from the edge with the holes punched. I did that for both pieces as well.

Next I got a brown paper bag and laid the thin cardboard pieces on it. I lined them up holes in the center with about 1/4 of inch in between hole punched sides and I even left on the thin strips I just cut out for measurement sake. Once both sides were lined up I picked up once piece and started gluing it with my Mod Podge (you can use any type of glue- white craft glue, glue stick, whatever). I didn't glue the little sliver we cut off before it is only there to keep the distance from your hole punched piece and your solid piece. Once all 4 pieces were glued (2 hole punched ones and 2 solid pieces) I turned it over and I should have smoothed it out but I didn't- I recommend that you do smooth out any bumps or bubbles.

Once it is dry I turned it onto the side with the cardboard showing and trimmed off the excess brown paper bag. Then I cut holes out of the bag where the holes from the cardboard were. Then I grabbed some news paper and tore it into strips and glue it to the side with the exposed cardboard (this is optional but I find it reinforces the hinge of the book). While I let that dry I got my plain paper and cut it to size (8.5 x 5.5 inches) and then I measured 1 and 1/8 inch from the side and scored it (this is optional- it just helps the book open easier). In that area (the 1 and 1/8 inch area) is where you will punch your holes. To do this I took my book which was mostly dried now and places the paper flush with 3 sides and hole punched them (you can mark them first and then punch but I found this method more accurate for me). Once I had about 20 sheets I stopped. This will be your book guts.

Now that the book was dried I went on to decorating. For my book I got newspaper and ripped it into thin strips and made a tree branch design gluing it down with a glue stick. Next I took my scrap brown paper and crumbled it up as much as I could and then using my craft knife cut out leaf shapes and placed them where they looked best to me. Then I sketched some bird sillouettes and cut them out with my craft knife then glued them onto thick cardboard I got from the flaps of a box. Cut them out again (this was just to give it some dimension) and hot glued them in place.

Once all the decorating was done I lined up my pages and book cover and got a thick rubber band and worked each end into the holes of all the pages and both covers (to do this I used the end of my small scissors to push it through and then a fabric pin to get it out- you can use whatever is available to you- like chopsticks or pliers). Once it was out I placed my pencil in there to hold it while I got a stick from the yard (which I had cut and sanded- this is optional you can leave it natural if you want but my stick was far too big so I had to cut it down). Then I switched my pencil and stick and voila a beautiful handmade recycled journal.