Felt Robot Monstar

Materials Needed:
• felt (assorted colors)
• embroidery needle
• embroidery thread
• googly eyes
• fiber fill
• hot glue & hot glue gun



To make this little robot monstar I started off with a sheet of light blue felt and a darker blue felt (for the back of this monstar). I drew the shape of the monstar that I wanted and then cut out both the light blue and dark blue felt giving me 2 of the same shape pieces. Next I placed the mouth and heart on and sewed them to the front of the light blue felt.

Then I grab both the light blue felt cutout and the darker blue felt cut out and I put them wrong sides together (right sides facing out). Then I got white embroidery thread and my embroidery needle and did a blanket stitch all around the robot, stuffing it with fiber fill as I went (you may need a chopstick to push fiber fill into smaller areas). When I finished sewing all the way around I got 2 different sized googly eyes and hot glued them on. Voila a cute little robot monstar!

T-Shirt Pillow

Materials Needed:
• T-shirts
• pillow form or fiber fill
• sewing machine & thread
• hand needle & thread
• scrap fleece


*front


*back w/ pocket

Another craft made from my little sis' old tees...a pillow. It's super easy and a great gift or a great way to add some fun to your couch or bed.

First I went to the craft store and bought a pillow form the size that I wanted (I chose a 14 x 14 in. pillow). Then I grabbed an old t-shirt and measured it out (one of the few times I measure). The shirt was too small to fit the 14 x 14 pillow so I cut it out as big as I could 12 x 12 in. Next I took a few scraps of t-shirt from the purse project and measured out borders to go around the center piece. Then I sewed one side of the border on and then the opposite, once they were sewn I trimmed them down to measure 14.5 in. across (it is 14.5 because I need 1/4 in seam allowance on both sides). Next I took my other 2 side pieces and sewed them on and trimmed them to measure 14.5 in across.

Once that side was done I used it as my "template" for the other side which I wanted to be a bit more angled and fun and not so straight forward. So I just took 3 strips of fabric from 3 different shirts and sewed them at angles. Then I took my "template" and placed it on top right sides together and trimmed them to match. Then I went to the sewing machine and stitched up the 3 sides leaving the last side open to put the pillow in. (If you chose not to use the pillow form than I would sew up most of the 4th side leaving a space big enough for your hand to fit through).

Next I took my scrap fleece in red and cut out a pocket for the pillow (I really like pockets in pillows and blankets). Then I hand stitched it on using a back stitch, I stitched the top of the pocket but didn't stitch it to the pillow, I just wanted it to look more finished. Then I placed the pillow form inside and stitched up the bottom by hand using a slip stitch. Now I have a new pillow!

Hand Monstar Puppet

Materials Needed:
• fleece (3 different colors)
• yarn
• googly snap on eyes
• fiber fill
• sewing machine & thread
• sewing needle & thread


* front


* back


* action shots

My brother's birthday is coming up and he wrote me asking if I would make him a puppet for his birthday. He asked for a moving mouth (most important he said), arms and something about wires (I didn't add wires-hope it works out ok for him). Having never made a puppet before (minus maybe a brown lunch bag puppet when I was a child) I really had no idea where to start. So I went searching on line and ended up finding a cool make your own monster puppet which looked really awesome so I ordered one for him and thought it would be a fun thing for him and his daughter to do together. Finished...or so I thought. But the idea kept spinning in my head how would I make a puppet; where would I start. So after many days of thinking it this is what I came up with.

First, I took the blue fleece and doubled it onto itself and drew the basic shape of my hand with my thumb tucked in, then I cut it out about a 1/2 in. on all sides (for sewing and for extra fabric inside).Now I had 2 pieces of the same shape. Then I took one of those pieces and figured out where the top of my thumb would hit and I marked it and then giving about 1/2 in. extra I cut it out following the same curve I had before. Then I took my two blue pieces and lined them up on top of each other and figured out where it would open for his mouth. Next I got my red fleece and cut out the mouth using the blue pieces open as a template (I am one of those "eye ball it" type crafters- no exact measurements here).

Once that was all cut, I went back to my blue fleece (doubled up again) and cut 2 crude arms with "hands" (just the area where his hands are gets bigger). Now I had 4 arms (2 fronts and back) and then I took it all to my sewing machine.

First, I took the arms and pinned them front to back and sewed them on the sides and hand area leaving the bottom un-sewn so I could stuff it. After both were sewn I then stuffed them with the fiber fill. Next, I pinned the 2 blue pieces together and then I pinned the arm in (I started with just one side than I did the other). With the arm I had to make sure it was tucked into the middle of the blue fleece so that when it was done being sewn and turned inside out his hands would be showing,(if I had them facing out then when I turned it inside out it would be on the inside). Then I stopped pinning where the mouth would start (telling me to stop sewing). I sewed one side then the other (pinning the next arm once I had finished the first side). Now I was left with the mouth I pinned it on and sewed it up.

Next, I flipped him inside out and got my goggly snap on eyes and placed them where I thought looked right, once I found that place I marked it and then cut a tiny slit into it, slid my eye in and snaped on the back part. Next I got some scrap yarn and took it and wrapped it around my hand several times. Once I got enough "hair" I took it off my hand and cut it in half then I took my needle and thread and hand stitched it onto his head when he had his hair finished I gave him a hair cut, mainly cutting any that were a lot longer than the rest. Lastly, I cut out an orange tounge and hand sewed it into the mouth using a slip stitch.

Once it was finished I had to of course play with it to test it out. It isn't the best puppet in the world but it was simple to make and lots of fun to play with. Reminds me a lot of The Muppets or Fraggle Rock.

Sock Monkey or Sock Monstar

Materials needed:
• pair of socks (or more)
• sewing machine & thread (or hand sew)
• buttons, googly eyes, felt, embroidery thread (for details)
• fiberfill
• chop stick (or long thin object to stuff arms and legs with)







So who doesn't wonder what to make with a pair of socks? The top 2 pictures is of my version of a sock monkey I made for my husband- this was the very first thing I made of socks! The bottom photo is one of my sock monstars (this is my little sis'). I got the idea for sock monstars from a book my big sis got me called Stupid Sock Creatures: Making Quirky, Lovable Figures from Cast-off Socks (great book for the know how and creativity inspiration).

Sock Monkey How To:
To start the sock monkey I chose my socks (I got a pair of long socks because I wanted this monkey to be able to hug my husband tight) then I laid it out with the heel side down and flattened it out the best I could. Then I cut a line in the center of the leg part of the sock from the part where you put your foot in to until about an 1.5 inches from the heel of the legs to create the legs. Once they were cut I went to the sewing machine and flipped it inside out then stitched the bottom of his legs and then up the inside of his legs leaving the crotch area to flip and stuff the monkey with.

Once his legs were sewn, I flipped the monkey inside out and I got some fiber fill and filled in the monkey (legs first- using a chopstick to stuff it into the bottom). Then stitched his crotch up using a slip stitch.

Next I got the other sock and cut off the heel (for his mouth) and 2 arms (the same way you did his feet) and then cut out 2 sets of ear shapes (4 total because your sock will have 2 layers you cut at once).

For the arms I sewed them inside out leaving one side open to stuff and sew to the monkey. For the ears (there are 2 so you will do this twice) I sewed them inside out all the way around leaving one side open so I could stuff it a bit and sew it onto the monkey head.

Once I had my arms ready I turned them right sides out and stuffed it using a chop stick and folded it under on the sides then did a quick hand stitch just to help it stay then placed it on the monkey and did a slip stitch around the arm twice securing it to the body. I did it again for the other arm.

Next I added the mouth (the heel part of the second sock). Here I folded over a small edge all the way around and flattened it then placed it where I wanted and did a slip stitch around it stopping with enough room to stuff his mouth then I finished sewing it up. Then I went to the ears and stuff them a little bit and again folded a small part all the way around and slip stitched it onto the monkey head. Then I got my embroidery thread and made a quick mouth crease by coming from one side to the other and then tying it off. Lastly I added black buttons for eyes (you can of course use anything you want- googly eyes, felt...ect).

Sock Monstar How To:
To create the sock monstar you use the same principles as the monkey but with a lot more creativity! Here instead of using the toe part of the sock for a head I cut it into a diagonal giving it more attitude (in my opinion at least). Also instead of leaving the heel of the first sock on the back I used it on the front and made it into a sewn down mouth (this came from the book: Stupid Sock Creatures: Making Quirky, Lovable Figures from Cast-off Socks) and I added a pink felt tounge sticking out. Then I did the arms the same as the sock monkey arms I just used different socks to make them. For the eyes I used googly eyes but I sewed them to a patch of hot pink felt that was eye liner and lashes for this girly monstar. Lastly I added some white felt wings so this monstar could fly. What is just so great about this is that you can pretty much do anything. I have added tails big heads, teeth, clothing, all kinds of stuff. It is just so much fun and not too difficult either.

Recycled Scrap T-Shirt Monstars

Materials needed:
• scrap material
• snap on eyes (available at craft stores)
• sewing machine (optional- can be hand sewn) & thread
• felt (optional for details- you could also use fabric paint or embroider details)
• yarn (optional for hair or other details)
• ribbon (optional for details)






Another super simple and fun project to do with some scrap pieces of fabric!

I made the top one out of scraps from my little sister's t-shirt purse I made her (the t-shirts were one's that she no longer fit in). The bottom one was just some scrap material I had lying around.

The idea is simple. I quickly drew a random shape and cut out 2 from either the same fabric (like in my second one) or different fabrics (like in the first one) and sewed all around the edges leaving a small space to flip it inside out. Once it was sewed clip around the curves (I normally clip the edges a lot when working with t-shirt material because it won't unravel). Then I flipped it inside out.

Next I added face details. With these 2 monstars I made felt mouths (including teeth on the bottom monstar) and then I got these plastic snap on eyes that you can get then at fabric and craft stores (what I love about these is they are super simple but instantly give it some personality). To attach the eyes you simply cut a small slice where you want them to go and then place the top of the eye through the hole and then using your opening on the bottom put your bottom eye attachment on to snap tight and keep the eye in place. You can also use buttons or felt or whatever you have lying around that would work for your monstar (that is one thing I love about making monstars is that no one knows what they are supposed to look like so you can make them look like whatever!)

After the face is done you can add little details like a belly, hair (on my bottom monstar), bow (on my top monstar) or whatever (again open to your interpretation). To make the hair I used some scrap yarn I had and cut it into longish stripes then sewed it down, when that was done I gave him a hair cut and styled it short and punky! For the belly I just sewed on a felt oval shape, The bow was a scrap piece of ribbon that I tied and then hand stitched on.

Once all the details are done I stuffed it using fiber fill (you can also use scrap material or whatever is soft and fluffy and you have lying around. Fill your monstar up and then sew it shut using a slip stitch. Now you can cuddle with your cute little homemade monstar!