Reversible T-Shirt Purse

Materials Needed:
• T-shirts (I used 9 but I think you could do this with 2 or 3)
• Sewing machine & thread
• 2 buttons (optional)
• needle and thread (optional)


*one side front & back


*the other side front & back


*strap detail

Recently my little sis cleaned out her closet and I snatched all of her awesome t-shirts (I just imagined all the fun things I could make). This t-shirt purse is my first project using those old t's. I didn't use a pattern and it is pretty thrown together but I would rate this project intermediate.

To start I grabbed the 3 different shirts that I wanted to be the one side and I grabbed my scissors and cut out how big I wanted my bag to be out of the green and brown t-shirt then I took the blue shirt and cut it out the same width and then cut out the height I wanted it to be (which ended up being a little less than half the height). This will also be my "template" for the patched side.

Next I took about 6 other t-shirts and cut out strips of their decorated sides and sewed them together side by side until I had enough to make the front and back of the purse. Then I took some scraps and cut out a couple of strips for the flap of the purse and sewed them together. Then I placed my original shirts on top of my stitched up ones and cut it down to size (great measuring I know). Once this was done I sewed up the sides and bottoms of my 2 purses and then I grabbed a small thin scrap (to be the button hole) and pinned it to the flaps (facing in- so when I flipped it inside out it would be showing on the right side; my flaps are right sides together) then I sewed the 2 flaps together (I would say if I did this again I would have sewn the tops onto the flaps first but I sewed them on later). Then I folded the top of the bag down about 1/4 in. and ironed it (I did this to both bag (not flap) pieces).

Next I made the strap. I used the extra pieces I had from cutting off the excess from the patched side and just sewed them together with a bunch of curvy and straight lines. To get the different colors I made my bobbin thread blue and my top thread yellow and flipped it over to get both the stitch colors on each side.

Then I took placed the patched purse inside of the solid purse wrong sides together and pinned it. Then I placed my straps inside the 2 pieces (the patched and the solid purses) and also put the flap inside the 2 pieces (again if I were re-doing this I would have those sewn on already). Then I stitched it all together (stitches showing) and then flipped it over and stitched another line as well (just for good measure and to make both the yellow and blue thread show).

Finally I placed a button where it should lay according to my button hole sewn onto the flap, and I put the needle through. Once it was on the other side I grabbed another button (it's reversible so we have to have one on the other side) and placed the needle through one of the holes and then I continued to stitch both buttons on. Now I can turn it either way and I have a fun new bag!

Hand Monstar Puppet

Materials Needed:
• fleece (3 different colors)
• yarn
• googly snap on eyes
• fiber fill
• sewing machine & thread
• sewing needle & thread


* front


* back


* action shots

My brother's birthday is coming up and he wrote me asking if I would make him a puppet for his birthday. He asked for a moving mouth (most important he said), arms and something about wires (I didn't add wires-hope it works out ok for him). Having never made a puppet before (minus maybe a brown lunch bag puppet when I was a child) I really had no idea where to start. So I went searching on line and ended up finding a cool make your own monster puppet which looked really awesome so I ordered one for him and thought it would be a fun thing for him and his daughter to do together. Finished...or so I thought. But the idea kept spinning in my head how would I make a puppet; where would I start. So after many days of thinking it this is what I came up with.

First, I took the blue fleece and doubled it onto itself and drew the basic shape of my hand with my thumb tucked in, then I cut it out about a 1/2 in. on all sides (for sewing and for extra fabric inside).Now I had 2 pieces of the same shape. Then I took one of those pieces and figured out where the top of my thumb would hit and I marked it and then giving about 1/2 in. extra I cut it out following the same curve I had before. Then I took my two blue pieces and lined them up on top of each other and figured out where it would open for his mouth. Next I got my red fleece and cut out the mouth using the blue pieces open as a template (I am one of those "eye ball it" type crafters- no exact measurements here).

Once that was all cut, I went back to my blue fleece (doubled up again) and cut 2 crude arms with "hands" (just the area where his hands are gets bigger). Now I had 4 arms (2 fronts and back) and then I took it all to my sewing machine.

First, I took the arms and pinned them front to back and sewed them on the sides and hand area leaving the bottom un-sewn so I could stuff it. After both were sewn I then stuffed them with the fiber fill. Next, I pinned the 2 blue pieces together and then I pinned the arm in (I started with just one side than I did the other). With the arm I had to make sure it was tucked into the middle of the blue fleece so that when it was done being sewn and turned inside out his hands would be showing,(if I had them facing out then when I turned it inside out it would be on the inside). Then I stopped pinning where the mouth would start (telling me to stop sewing). I sewed one side then the other (pinning the next arm once I had finished the first side). Now I was left with the mouth I pinned it on and sewed it up.

Next, I flipped him inside out and got my goggly snap on eyes and placed them where I thought looked right, once I found that place I marked it and then cut a tiny slit into it, slid my eye in and snaped on the back part. Next I got some scrap yarn and took it and wrapped it around my hand several times. Once I got enough "hair" I took it off my hand and cut it in half then I took my needle and thread and hand stitched it onto his head when he had his hair finished I gave him a hair cut, mainly cutting any that were a lot longer than the rest. Lastly, I cut out an orange tounge and hand sewed it into the mouth using a slip stitch.

Once it was finished I had to of course play with it to test it out. It isn't the best puppet in the world but it was simple to make and lots of fun to play with. Reminds me a lot of The Muppets or Fraggle Rock.

Sock Monkey or Sock Monstar

Materials needed:
• pair of socks (or more)
• sewing machine & thread (or hand sew)
• buttons, googly eyes, felt, embroidery thread (for details)
• fiberfill
• chop stick (or long thin object to stuff arms and legs with)







So who doesn't wonder what to make with a pair of socks? The top 2 pictures is of my version of a sock monkey I made for my husband- this was the very first thing I made of socks! The bottom photo is one of my sock monstars (this is my little sis'). I got the idea for sock monstars from a book my big sis got me called Stupid Sock Creatures: Making Quirky, Lovable Figures from Cast-off Socks (great book for the know how and creativity inspiration).

Sock Monkey How To:
To start the sock monkey I chose my socks (I got a pair of long socks because I wanted this monkey to be able to hug my husband tight) then I laid it out with the heel side down and flattened it out the best I could. Then I cut a line in the center of the leg part of the sock from the part where you put your foot in to until about an 1.5 inches from the heel of the legs to create the legs. Once they were cut I went to the sewing machine and flipped it inside out then stitched the bottom of his legs and then up the inside of his legs leaving the crotch area to flip and stuff the monkey with.

Once his legs were sewn, I flipped the monkey inside out and I got some fiber fill and filled in the monkey (legs first- using a chopstick to stuff it into the bottom). Then stitched his crotch up using a slip stitch.

Next I got the other sock and cut off the heel (for his mouth) and 2 arms (the same way you did his feet) and then cut out 2 sets of ear shapes (4 total because your sock will have 2 layers you cut at once).

For the arms I sewed them inside out leaving one side open to stuff and sew to the monkey. For the ears (there are 2 so you will do this twice) I sewed them inside out all the way around leaving one side open so I could stuff it a bit and sew it onto the monkey head.

Once I had my arms ready I turned them right sides out and stuffed it using a chop stick and folded it under on the sides then did a quick hand stitch just to help it stay then placed it on the monkey and did a slip stitch around the arm twice securing it to the body. I did it again for the other arm.

Next I added the mouth (the heel part of the second sock). Here I folded over a small edge all the way around and flattened it then placed it where I wanted and did a slip stitch around it stopping with enough room to stuff his mouth then I finished sewing it up. Then I went to the ears and stuff them a little bit and again folded a small part all the way around and slip stitched it onto the monkey head. Then I got my embroidery thread and made a quick mouth crease by coming from one side to the other and then tying it off. Lastly I added black buttons for eyes (you can of course use anything you want- googly eyes, felt...ect).

Sock Monstar How To:
To create the sock monstar you use the same principles as the monkey but with a lot more creativity! Here instead of using the toe part of the sock for a head I cut it into a diagonal giving it more attitude (in my opinion at least). Also instead of leaving the heel of the first sock on the back I used it on the front and made it into a sewn down mouth (this came from the book: Stupid Sock Creatures: Making Quirky, Lovable Figures from Cast-off Socks) and I added a pink felt tounge sticking out. Then I did the arms the same as the sock monkey arms I just used different socks to make them. For the eyes I used googly eyes but I sewed them to a patch of hot pink felt that was eye liner and lashes for this girly monstar. Lastly I added some white felt wings so this monstar could fly. What is just so great about this is that you can pretty much do anything. I have added tails big heads, teeth, clothing, all kinds of stuff. It is just so much fun and not too difficult either.

Recycled T-Shirt Baby Quilt

Materials needed:
• 6-12 old t-shirts (or scrap material)
• sewing machine & thread
• embroidery thread
• batting (or old sheet or fabric)
• scrap fabric for borders
• yard or so of fabric for back
• patches (optional)
• felt (optional)
• yarn (optional)




close up view

I am one of those people who feels emotionally attached to my clothing, so I always had a hard time cleaning out my closet when the time came. Even though things wouldn't fit I just couldn't help but wanting to keep them because inevitably they reminded me of some time in my life. So instead of letting them just sit in my closet and never see the light of day I decided to make my husband and I a quilt out of them. The original one is a huge and it took me 2 years to finish (note: I worked on it on and off for the 2 years mainly waiting to collect enough old clothes in the process but I think if I was diligent on it and had all the scraps I needed it would have taken me about 4 months).

This one above took me about 3 days. It is a small version that I made for my little Zoe, while I was pregnant. I really loved the idea that she would sleep with our shirts and smell and be "protected" by us. I have made this baby blanket sized quilt a few other times and don't find it to be too hard to do with a little time and patience.

To start I gathered scraps of t-shirts from our other quilt but chances are you don't have that so you can either use scrap material you have or just gather 6-12 t-shirts that you no longer wear any more but have some attachment to. Then I got a piece of scrap foam board (anything thing and sturdy will do I used it as my template) I measured out how big I wanted the squares. In this one above there are 2 different sizes a smaller square and a larger one. I made the smaller ones 1/2 the size of the larger one and added a 1/4 in seam allowance (meaning the bigger one was 8.5 in sq and the smaller one then would be 4.25 in sq plus the 1/4 in for the seam allowance giving me 4.5 in sq). . Another great idea I have seen is that you just cut long strips and sew them together which gives it a fun stripy look. You of course can do just about anything you want- shapes, colors, whatever you can think of.

So after making my templates I grabbed my shirts and placed the template right on top and then used my rotary cutter and cut around the template (you can also mark it with sewing pencils or chalk and then cut on your line). Once I had enough to lay it down (the total size of my quilt with out the border was 27.5 in x 36.5) I laid out the pieces the way they looked best to me. I just did a simple pattern here of a big square, 4 small squares, big square, 4 sm. sq. across and then switched it for the next row and made it 4 sm sq, big sq, 4 sm sq, big square and again for the next row I switched it back. Ending with 4 rows across and 4 rows down (and a row I count as the size of my big square).

Once they are in position the way I like them I take one section of the 4 sm sq and sew those together to make a piece that is as big as my bg sq. I do this for all my sm sq until they are all in big pieces. Then I pin my first row together and sew it. Then I take my second row and sew it and then the third row and sew it. Then I pin the first row to the second row and sew and then that piece gets pinned to the 3rd row and I sew it.

Once that whole center piece is done I then find a scrap fabric to make a border on my edges (normally this means it will be a mix of colors but you can of course finish it off with the same color and fabric or whatever is easiest for you). For the border on this one I used 2 inches thick of material and sewed it to my shorter sides all the way up. Then I trimmed off the excess material (I didn't do any measuring lengthwise because when I do I inevitably end up with miss matched pieces in the bad way- this is how I avoid any problems). I did the same to the other short side (I did this so my sides would look the same but you can just work your way around if you want- going from short side to long side to short side to long side or if you know how you can even make diagonal cornors). Once the 2 short sides were done I did the long sides.

When your border is finished I then added a little batting. I used the batting (from the fabric store) I had left over from my other quilt but if you want you can also use old sheets or old curtians- whatever. Then I laid the quilt onto the batting with the quilt facing up. I smoothed it out and pined it using quilt safety pins. The reason I use those is because they don't rust out in time and this project can take a while (like my 2 year quilt). Then I trimmed it down to about the edge of my borders just to make it easier to work with.

Next I got embroidery thread (leaving it as 6 strands but you can make it as thick as you want) and did a simple stitch around where I sewed my t-shirts together, sewing the t-shirts to the batting. I loved doing this chunky hand stitch because it really looks hand done and has a quirkiness about it.

Once I sewed all of my squares to the backing I then trimmed down the batting about 1/2 in from the edge of the border all the way around (I leave it on at first just in case I pull on the batting and end up too short on one side). Then I added my monstar and dragonfly. To do the monstar I just cut the shapes out of felt and fleece remnants I had and then hand stitched it to my quilt before finishing it off I got a little bit of fiber fill and stuffed it making it 3-D but plush still. Then I got some patches (a dragonfly and flower) and hand sewed them on.

When the decorating is done I got a large section of scrap fabric (it measured over the final size of my quilt) from my other quilt or you can buy about a yard of a soft fabric (measure your final piece and make sure to get enough fabric for your piece) or just sew a couple of larger scraps together. Then I pinned it with right sides together and started sewing starting the edges together leaving an opening for me to flip it inside out.

Once sewed I trimmed the corners so they would lie flat and then flipped it inside out. Then I pinned the border down and sewed (stitch showing) around my border close to the t-shirt part. This helps it attach to the back piece of fabric better. Then I hand stitched my opening closed using a simple slip stitch and it was finished. If you are making a larger quilt I recommend getting some scrap yarn and sewing little knots on the corners of your squares to tie them to the fabric below. On the small quilt this doesn't matter as much but the larger the quilt the more stability you need to keep the 2 pieces from sliding around.

Duct Tape Headands

Materials needed:
• duct tape (any color or colors of your choice)
• headband
• craft knife
• scissors
• goo-gone (optional but I recommend this to keep your scissors and craft knife from getting gooped up)

Duct tape is always fun to work with. I have made wallets and purses but one day I decided to make a head band. I got an old one and ripped off the ribbon and covered it with duct tape. It was bright green with white roses. I gave it to my little niece and when she wore it to school all of her teachers wanted to know where she got it. So I was inspired to make more.

To do this project I ordered blank headbands online but you can also use old ones or buy a cheap one and revamp it.

I got multiple colors of duct tape (black, white, silver of course, pink, teal, green, orange, purple- I have seen other cool ones as well but I went with the solid colors that I could find).

To start this project I just jumped in and learned along the way the best way to go about it. I will try to share some of my tricks here and hopefully you will understand.

First I pulled a long piece of duct tape off the roll and stuck it to the headband underneath area. Then I snipped the corners off and placed little slits all around on the tape that overlapped the headband so I could lay it flat onto the headband. Then I taped those little overlapped parts down on the top. Next I got another big piece I placed on the top and did the same overlapping it to the bottom part. Then I added details such as stripes (which I did by ripping the duct tape into thin strips and positioning them on), bows (I find the best way is to fold down a little more than 1/3 and then fold in the other side so that no sticky side is showing, then I would take a small skinny piece of duct tape and tape it over for the middle part or I would just tie it into a bow), or flowers (again fold down 1/3 towards the sticky side and then I round off the corner I am starting with and then start twisting it up "fluffing" the sides as I go), and leaves (here I just place 2 pieces of duct tape on top of each other sticky sides together and cut out a leaf shape) then use duct tape to tape it together and then you have a stylish fun headband! (Props to my little sis for being my beautiful model).