Duct Tape Monstar Coasters

Materials Needed:
• duct tape
• craft knife
• scissors
• self-healing cutting board



Duct tape is always a fun medium. For this project I highly recommend working on a self healing cutting board because you can stick the duct tape down on it to cut it and peel it off easily.

To start I got my self healing cutting board and taped strips of one color of the duct tape to make the background once I had one side down I flipped it over and placed strips of the same color down but in the opposite direction (ie. if you laid your first ones down horizontally the other side was laid down vertically giving it a more secured base). When I had a big enough area covered in duct tape front and back I cut out a square (this would be the size of the final coaster). Once that was done I created my monstars using by laying down a few strips of color for the monstar base and then I cut it out to the shape I wanted. Then I placed it on top of the square and trimmed off any that wasn't on the square. Then I added a duct tape boarder in a different color. To do this I just laid out a piece of duct tape and cut it in half length wise, then taped it on the sides and folded it over to the back. Then I would tape down a piece of the desired color and cut out little details that I wanted to add.

What is nice about working with duct tape- if you place something and want to change it you can easily pick it up and move it.

Super Simple Pocket Notebook

Materials Needed:
• thin cardboard
• decorative paper
• hole punch
• paper of your choice for inside
• glue
• ribbon
• sticker or other decorations (optional)


* front


* back

So this little pocket notebook is a really easy one to make. I just grabbed some thin cardboard laying around and cut it to the size I wanted my notebook to be. Then I cut out an exact replica so I have 2 pieces of thin cardboard for front and back of my book. Next I got my decorative paper and glued it onto each piece of cardboard separately. I trimmed around the edges so that I had enough to fold over but not too much so that it would be bulky. Then I folded it over to the other side and glued it down. Then I grabbed a piece of plain colored paper and folded the edges to be just short of my original measurements and then folded it the other way and gently tore where I folded it (giving me a nice deckle edge). Then I glued that onto the inside cover (do this twice so you have a front and back piece). Next I got my hole punch and punched 2 holes in it where I wanted them.

Then I cut out my writing/drawing paper to be the size of my cardboard and punched holes in it using my covers as a template to match the holes. I grabbed some next and threaded it through the holes and tied a few knots. Finally I added a thick glittery heart sticker on top. You can decorate however you want or even leave it plain and draw on it as you go.

Felt Robot Monstar

Materials Needed:
• felt (assorted colors)
• embroidery needle
• embroidery thread
• googly eyes
• fiber fill
• hot glue & hot glue gun



To make this little robot monstar I started off with a sheet of light blue felt and a darker blue felt (for the back of this monstar). I drew the shape of the monstar that I wanted and then cut out both the light blue and dark blue felt giving me 2 of the same shape pieces. Next I placed the mouth and heart on and sewed them to the front of the light blue felt.

Then I grab both the light blue felt cutout and the darker blue felt cut out and I put them wrong sides together (right sides facing out). Then I got white embroidery thread and my embroidery needle and did a blanket stitch all around the robot, stuffing it with fiber fill as I went (you may need a chopstick to push fiber fill into smaller areas). When I finished sewing all the way around I got 2 different sized googly eyes and hot glued them on. Voila a cute little robot monstar!

T-Shirt Pillow

Materials Needed:
• T-shirts
• pillow form or fiber fill
• sewing machine & thread
• hand needle & thread
• scrap fleece


*front


*back w/ pocket

Another craft made from my little sis' old tees...a pillow. It's super easy and a great gift or a great way to add some fun to your couch or bed.

First I went to the craft store and bought a pillow form the size that I wanted (I chose a 14 x 14 in. pillow). Then I grabbed an old t-shirt and measured it out (one of the few times I measure). The shirt was too small to fit the 14 x 14 pillow so I cut it out as big as I could 12 x 12 in. Next I took a few scraps of t-shirt from the purse project and measured out borders to go around the center piece. Then I sewed one side of the border on and then the opposite, once they were sewn I trimmed them down to measure 14.5 in. across (it is 14.5 because I need 1/4 in seam allowance on both sides). Next I took my other 2 side pieces and sewed them on and trimmed them to measure 14.5 in across.

Once that side was done I used it as my "template" for the other side which I wanted to be a bit more angled and fun and not so straight forward. So I just took 3 strips of fabric from 3 different shirts and sewed them at angles. Then I took my "template" and placed it on top right sides together and trimmed them to match. Then I went to the sewing machine and stitched up the 3 sides leaving the last side open to put the pillow in. (If you chose not to use the pillow form than I would sew up most of the 4th side leaving a space big enough for your hand to fit through).

Next I took my scrap fleece in red and cut out a pocket for the pillow (I really like pockets in pillows and blankets). Then I hand stitched it on using a back stitch, I stitched the top of the pocket but didn't stitch it to the pillow, I just wanted it to look more finished. Then I placed the pillow form inside and stitched up the bottom by hand using a slip stitch. Now I have a new pillow!

Silk Flower Earrings

Materials Needed:
• silk flowers
• beads
• earring hooks (2)
• flat jewelry head pins (8)
• needle nose pliers




*detail

After all of the projects I have used these flowers in I had 2 lonely little flowers left, the first thing that came to mind was to make earrings out of them.

It is a very simple project I just took a medium sized circular bead and placed it on a flat head pin and then placed my silk flower and then a few green beads (for the "stem"). To close the head pin I grabbed my needle nose pliers and bent it into a circle trimming any extra head pin that wasn't needed. Before it was completely closed I looped it onto the hole on the earring hook.

Next I took some different green beads to make my "leaves" with. I got one of my flat head pins and slid on 2 or 3 beads and then closed it up like I did with the flower one. I did that 3 times so my flower ends up with 3 "leaves". Once that was done I had one earring so I repeated it and made the other.

Reversible T-Shirt Purse

Materials Needed:
• T-shirts (I used 9 but I think you could do this with 2 or 3)
• Sewing machine & thread
• 2 buttons (optional)
• needle and thread (optional)


*one side front & back


*the other side front & back


*strap detail

Recently my little sis cleaned out her closet and I snatched all of her awesome t-shirts (I just imagined all the fun things I could make). This t-shirt purse is my first project using those old t's. I didn't use a pattern and it is pretty thrown together but I would rate this project intermediate.

To start I grabbed the 3 different shirts that I wanted to be the one side and I grabbed my scissors and cut out how big I wanted my bag to be out of the green and brown t-shirt then I took the blue shirt and cut it out the same width and then cut out the height I wanted it to be (which ended up being a little less than half the height). This will also be my "template" for the patched side.

Next I took about 6 other t-shirts and cut out strips of their decorated sides and sewed them together side by side until I had enough to make the front and back of the purse. Then I took some scraps and cut out a couple of strips for the flap of the purse and sewed them together. Then I placed my original shirts on top of my stitched up ones and cut it down to size (great measuring I know). Once this was done I sewed up the sides and bottoms of my 2 purses and then I grabbed a small thin scrap (to be the button hole) and pinned it to the flaps (facing in- so when I flipped it inside out it would be showing on the right side; my flaps are right sides together) then I sewed the 2 flaps together (I would say if I did this again I would have sewn the tops onto the flaps first but I sewed them on later). Then I folded the top of the bag down about 1/4 in. and ironed it (I did this to both bag (not flap) pieces).

Next I made the strap. I used the extra pieces I had from cutting off the excess from the patched side and just sewed them together with a bunch of curvy and straight lines. To get the different colors I made my bobbin thread blue and my top thread yellow and flipped it over to get both the stitch colors on each side.

Then I took placed the patched purse inside of the solid purse wrong sides together and pinned it. Then I placed my straps inside the 2 pieces (the patched and the solid purses) and also put the flap inside the 2 pieces (again if I were re-doing this I would have those sewn on already). Then I stitched it all together (stitches showing) and then flipped it over and stitched another line as well (just for good measure and to make both the yellow and blue thread show).

Finally I placed a button where it should lay according to my button hole sewn onto the flap, and I put the needle through. Once it was on the other side I grabbed another button (it's reversible so we have to have one on the other side) and placed the needle through one of the holes and then I continued to stitch both buttons on. Now I can turn it either way and I have a fun new bag!

Embellished Tank

Materials Needed:
• tank top (or shirt or skirt or pants or anything you want to embellish)
• silk flowers
• small beads
• needle & thread




*detail

During summer in the South, tank tops are essential and I own a ton of tank tops in a variety of colors but all of them are plain, which is fine for relaxing at home but sometimes I want to go out somewhere nicer but still want to wear one of my comfy tanks. This is why I decided to sew on some flowers to one of my many grey tank tops.

To start this project, I grabbed a handful of silk flowers (left over from a friends wedding) and took off the stems and the center pieces and was left with just the flower and no plastic parts. Then I matched up a few flowers together and positioned them in many places on the tank finding what I liked most and then marked it. Next I took my needle and thread and went up from the back of the fabric to the top, placed the flower petals on for the first flower and added a small bead then took my needle and thread back down and repeated that for 3 beads. Then I did that to both of the other flowers. Now I have a new top. Super simple and now I have a dresser but still comfy tank.

Hand Monstar Puppet

Materials Needed:
• fleece (3 different colors)
• yarn
• googly snap on eyes
• fiber fill
• sewing machine & thread
• sewing needle & thread


* front


* back


* action shots

My brother's birthday is coming up and he wrote me asking if I would make him a puppet for his birthday. He asked for a moving mouth (most important he said), arms and something about wires (I didn't add wires-hope it works out ok for him). Having never made a puppet before (minus maybe a brown lunch bag puppet when I was a child) I really had no idea where to start. So I went searching on line and ended up finding a cool make your own monster puppet which looked really awesome so I ordered one for him and thought it would be a fun thing for him and his daughter to do together. Finished...or so I thought. But the idea kept spinning in my head how would I make a puppet; where would I start. So after many days of thinking it this is what I came up with.

First, I took the blue fleece and doubled it onto itself and drew the basic shape of my hand with my thumb tucked in, then I cut it out about a 1/2 in. on all sides (for sewing and for extra fabric inside).Now I had 2 pieces of the same shape. Then I took one of those pieces and figured out where the top of my thumb would hit and I marked it and then giving about 1/2 in. extra I cut it out following the same curve I had before. Then I took my two blue pieces and lined them up on top of each other and figured out where it would open for his mouth. Next I got my red fleece and cut out the mouth using the blue pieces open as a template (I am one of those "eye ball it" type crafters- no exact measurements here).

Once that was all cut, I went back to my blue fleece (doubled up again) and cut 2 crude arms with "hands" (just the area where his hands are gets bigger). Now I had 4 arms (2 fronts and back) and then I took it all to my sewing machine.

First, I took the arms and pinned them front to back and sewed them on the sides and hand area leaving the bottom un-sewn so I could stuff it. After both were sewn I then stuffed them with the fiber fill. Next, I pinned the 2 blue pieces together and then I pinned the arm in (I started with just one side than I did the other). With the arm I had to make sure it was tucked into the middle of the blue fleece so that when it was done being sewn and turned inside out his hands would be showing,(if I had them facing out then when I turned it inside out it would be on the inside). Then I stopped pinning where the mouth would start (telling me to stop sewing). I sewed one side then the other (pinning the next arm once I had finished the first side). Now I was left with the mouth I pinned it on and sewed it up.

Next, I flipped him inside out and got my goggly snap on eyes and placed them where I thought looked right, once I found that place I marked it and then cut a tiny slit into it, slid my eye in and snaped on the back part. Next I got some scrap yarn and took it and wrapped it around my hand several times. Once I got enough "hair" I took it off my hand and cut it in half then I took my needle and thread and hand stitched it onto his head when he had his hair finished I gave him a hair cut, mainly cutting any that were a lot longer than the rest. Lastly, I cut out an orange tounge and hand sewed it into the mouth using a slip stitch.

Once it was finished I had to of course play with it to test it out. It isn't the best puppet in the world but it was simple to make and lots of fun to play with. Reminds me a lot of The Muppets or Fraggle Rock.

Embellished Work Apron

Materials Needed:
• apron
• computer
• Dark t-shirt transfers (I use Avery Ink Jet Dark T-shirt Transfer paper- I like theirs the best- plus I have an ink jet)
• printer
• silk flowers
• thread & needle
• beads




*detail

This project came along because I really needed an apron. I am always doing messy crafts and never fail to get it all over my clothes, so instead of having to change clothes I decided an apron was the way to go. So I bought a cheap all black apron and decided to embellish it with a few touches.

First I found some silk flowers that I had from a table decoration that was at my friends wedding and I thought I would like to sew them onto the sides of the pockets (it felt more magical that way). So I took the flowers apart. Taking the stems off and then popping apart the middle part of the flower and was left with petals with a hole in the center. To attach these I got some thread and knotted it then started from inside the pocket and brought my needle up then I placed 2 set of petals through the needle and then a small bead then brought my needle back through the other side then went back up and placed another bead and did that until I had 3 or more beads for the center of the flower.

Next I went to my computer and drew up a monstar for the pocket (he is supposed to be a helper monstar handing me glue, pencil, scissors, paint brush- you know whatever I need :) Then I also made some text that spelled out Monstar Maker and then once that was all designed I printed it out on a quality print setting.

Once it was printed I cut out my designs leaving a white boarder around my little monstar helper. The text already had a white box around it so I just cut out the box. Then I took my monstar and placed him where I wanted him and ironed him on according to the directions from the transfer paper and then did the same for the letters. Now this didn't come out perfect but I still wanted to post it. I think either the iron was set too high or the fabric dye maybe came through the iron on so it has a sort of dirty look to it but I figure it is just gonna get dirty anyway but it was a fun and simple project and now I have a handy dandy work apron!

Recycled Paper Mache Vase

Materials needed:
• empty plastic container (I used my old Mod Podge bottle)
• newspaper
• white glue
• water
• paint
• hot glue (optional
• googly eyes (optional)



This idea came from my Ready Made Magazine this month. They made paper mache vases out of old plastic containers. I of course wanted to make my own so I decided to make a monstar case.

To start this project I cleaned out my Mod Podge container getting all the gunk out and taking the label off and using some Goo Gone to get rid of the sticky parts. Once it was washed and dried I made a bowl of 50/50 white glue and water mixture and tore my news paper into strips. Then I dipped the newspaper stripes into the glue/water mixture and placed the strips around covering the whole area. Once completely covered I let it dry.

Once it was dry I got my stripes of newspaper and bunched it up to make a nose. Then I used small stripes of the glue/water covered news paper and placed it over the nose until it was well connected to the bottle. I did this for the mouth and the nose and mouth on the other side (it's a 2 headed monstar). Then I let it dry for a long time (the bunched up part takes longer to dry but you want it completely dry before painting to avoid mildew).

Once it was dry I painted a white base coat of acrylic all over and then once that was dry I painted the vase how I wanted it and then when that was dry painted a layer of Mod Podge. When all of that was dry I hot glued googly eyes on it.

You really can have as much fun as you want with this. Paint it one color or paint a picture, add embellishments like ribbon, glitter, jewels, wire, shells, whatever really.